need help with URC 7530

[raymond2000]

hi I have a URC 7530 that I want to program with IR, I get a no remote found message, and interface no found , after doing some reading on the forum, I have realised that this remote needs and 1k eeprom and c11
https://www.hifi-remote.com/forums/viewtopic.php?t=8370

the URC 7530 remote is mentioned here,
https://www.hifi-remote.com/forums/viewt ... highlight=

i need some help in getting this remote ready for programming, the user uploaded his picture but the soldering it is unclear to me.

i have a usb to tll like this one, the COM appears, the driver is installed, but get interface not found

http://www.ebay.co.uk/itm/New-CP2102-US ... 0931605697

can use it for programming a JP1 remote, should i solder the 6 pin on the board first

this is what learned from the forum for wire connection
CP 2102 IDC-6
1 TXD ---- 4 Data-In
3 RTS_N ---- 2 /RESET
5 RXD ---- 6 Data-Out
(GRD) ---- 3 GND



last question i have another remote for dreambox hd800 it got JP1 want to programm it too,but don't know if it got eeprom on it, see my pitures , and advice me please,







here the link for the images

https://www.hifi-remote.com/forums/dload ... e_id=11967

Thank you

[3FG]

It appears that these are both JP1 remotes. The Dreambox remote seems to have an installed EEPROM.

The interface you're using CP2102 will not work with JP1 remotes; it should work with JP1.2/1.3/1.4/2 remotes--in other words, any remote made in the last 5 years or more.

You'll either need to build/buy a JP1 interface or get a newer remote. In the USA, cable company remotes are cheap on eBay. For example Comcast remotes are typically available for $6 shipped. The ones with a red OK/Select button are JP1.3 or JP2 and should work with your interface.

[Kevin Timmerman]

CP2101 and CP2102 do not work. They don't allow control the the TxD line.

https://www.hifi-remote.com/forums/viewt ... 933#p104933