JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Runco LS-1 Projector codes

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search
View previous topic :: View next topic  
Author Message
BigDLondon



Joined: 17 Oct 2003
Posts: 62
Location: London,Ontario CANADA

                    
PostPosted: Sat Jan 26, 2013 12:27 pm    Post subject: Runco LS-1 Projector codes Reply with quote

1. Device:Runco LS-1 Projector
2. Type of device:Projector
3. Year:2013
4. JP1/UEI Remote model:URC 8910
5. Do you have a JP1 cable?yes
6. Still have original remote?yes
7. Checked the file section?yes
8. Checked Pronto file section (at R/C)?yes
9. Partially working setup code?No
10. Learning remote question?I've learned buttons but they're not working.
11. Have you tried the JP1 Lookup Tool?yes
Here's the link http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11690
Thanks
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat Jan 26, 2013 2:25 pm    Post subject: Reply with quote

These are all perfectly learned signals NEC1 device 6
Code:
Function dev OBC
Menu   6      1
Guide  6      9
Up     6      26
Left   6      29
Right  6      31
Down   6      24
Select 6      23
Info   6      21
Exit   6      157

Have you converted these into an upgrade? Are they masked by keymoves or macros? The learns themselves are not the problem.
The signals in your IR file were learned into a 2104. Were the learns from the OEM remote or from your 8910?
Back to top
View user's profile Send private message
BigDLondon



Joined: 17 Oct 2003
Posts: 62
Location: London,Ontario CANADA

                    
PostPosted: Sat Jan 26, 2013 2:38 pm    Post subject: Reply with quote

I've learned these codes from my Runco remote. I tried entering them into mapmaster than uploading them to my 8910 remote.No response from PJ
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat Jan 26, 2013 2:52 pm    Post subject: Reply with quote

OK, post your IR file for the 8910 to the Diagnosis area of the File Section. We'll probably be able to see where things have gone wrong.
Back to top
View user's profile Send private message
BigDLondon



Joined: 17 Oct 2003
Posts: 62
Location: London,Ontario CANADA

                    
PostPosted: Sat Jan 26, 2013 3:39 pm    Post subject: Reply with quote

Here's the IR for the Runco LS-1 upgrade.On my 8910

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11691
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat Jan 26, 2013 5:23 pm    Post subject: Reply with quote

In your device upgrade, the device is 6, but the subdevice is also shown as 6. The NEC protocol has evolved over time. Originally the subdevice was by definition the binary complement of the device. Later, companies started making the the subdevice completely independent of the device number. By convention, if a NEC IR protocol is listed with a device number and no subdevice number, it is the original type. That's the case with your Runco.

So in RM, either leave the subdevice field blank, or fill it with 255-6 = 249.
Back to top
View user's profile Send private message
BigDLondon



Joined: 17 Oct 2003
Posts: 62
Location: London,Ontario CANADA

                    
PostPosted: Sat Jan 26, 2013 9:49 pm    Post subject: Reply with quote

Thanks that worked.Only wished the Runco used the power button for on and off instead of separate buttons.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control