View previous topic :: View next topic |
Author |
Message |
egn
Joined: 11 Feb 2004 Posts: 50
|
Posted: Sun Feb 22, 2004 6:10 am Post subject: RC6-6-20 - What to enter in KM to select this protocol? |
|
|
Hi,
for the SAT device Topfield (1206) there are two protocols are used. One is NEC1 and one is RC6-6-20 as decoded by DecodeCCF and IR learned signal. As I want to make a upgrade with KM I tried to find the right setting in KM and was not successful with the RC6 protocols provided in KM protocol tab.
What protocol has to be selected in KM to get this protocol?
Thanks,
Emil |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Sun Feb 22, 2004 7:59 am Post subject: |
|
|
If you do a search for "sky" or for "RC6-6-20" in this forum, you'll find several discussions of it.
A while back, I created a smaller upgrade for this protocol. It is easy to use in RemoteMaster. Select the RC6-M-20n protocol. Set the subdevice to 0 or 12 as reported by the decode you have. The other values can be left blank because the defaults are right for Sky, or fill them in from the decode:
M=6
Device=0
T=0
In the various threads discussing Sky, you can also find how to use the older (larger) version of the upgrade in KM. I don't remember if anyone has provided a way to use the smaller upgrade in KM. |
|
Back to top |
|
|
egn
Joined: 11 Feb 2004 Posts: 50
|
Posted: Sun Feb 22, 2004 8:56 am Post subject: |
|
|
Hi John,
thanks for the answer, I will have a look.
Sorry for not using the search function.
Emil |
|
Back to top |
|
|
|