Guys, I've looked everywhere and I cant find the code for this model (humax sh26 - sky hdtv brazil)..
Tried all possible codes in slingbox, still can't make it work.
Can anyone point out where i can find such code or even make one (I'm new at this and don't know much).
I'd really appreciate any help
Thanks
HUMAX SH26 HELP
Moderator: Moderators
-
alanrichey
- Expert
- Posts: 3533
- Joined: Mon Mar 24, 2008 7:14 am
- Location: UK/USA
1. Was there any error message after you typed in the Code and tapped the Power button ?
No.No error whatsoever
2. Did you give the Power command plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)
Yes, i have.
3. After completing the setup (regardless of whether the Power button worked) do any of the other buttons work ?
None of the buttons work. Not even the led in the decoder blinks.
4. Have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ? (Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash)
Yep. the IR blaster is firing a white flash.
5. Have you experimented with the placement of the IR Blaster ? On some devices this is critical so don't give up too quickly.
yep, still nothing.
No.No error whatsoever
2. Did you give the Power command plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)
Yes, i have.
3. After completing the setup (regardless of whether the Power button worked) do any of the other buttons work ?
None of the buttons work. Not even the led in the decoder blinks.
4. Have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ? (Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash)
Yep. the IR blaster is firing a white flash.
5. Have you experimented with the placement of the IR Blaster ? On some devices this is critical so don't give up too quickly.
yep, still nothing.
-
The Robman
- Site Owner
- Posts: 21945
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
thanks brandaogu for following the readme instructions and providing complete details, I know Alan will appreciate it. Unfortunately, you may be out of luck unless we can find some info on the signals that this devices uses.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
-
alanrichey
- Expert
- Posts: 3533
- Joined: Mon Mar 24, 2008 7:14 am
- Location: UK/USA
-
vickyg2003
- Site Admin
- Posts: 7109
- Joined: Sat Mar 20, 2004 12:19 pm
- Location: Florida
- Contact:
I could not find any information on the Humax HR26 either. My only suggestion would be to give this one a try, but I doubt it will work.
https://www.hifi-remote.com/forums/dload ... le_id=6644
EDIT:
I have a little more confidence in my pick. Both of these units use the Directv 12.3 code. If this code works at all, we can recheck the functions.
DIRCTV SH26
SKY SAT SH25
Please report back with your results.
https://www.hifi-remote.com/forums/dload ... le_id=6644
EDIT:
I have a little more confidence in my pick. Both of these units use the Directv 12.3 code. If this code works at all, we can recheck the functions.
DIRCTV SH26
SKY SAT SH25
Please report back with your results.
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.