JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Holmes HCH8305 Heater

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
ronmon



Joined: 25 Nov 2008
Posts: 24

                    
PostPosted: Sat Oct 20, 2012 11:08 am    Post subject: Holmes HCH8305 Heater Reply with quote

1. Device: Holmes Portable Heater HCH8305
2. Type of device: Portable Heater
3. Year: 2012
4. JP1/UEI Remote model: 15-2104 (But I will be using it on others)
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? No
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes

I have recently purchased this portable heater, which comes with a 5 button remote. I am able to "Learn" the buttons, but I get a Signal Description (list of numbers), rather than a protocol. So ... I assume I need a Protocol (which has always been magic to me). I did a search for a KM definition, but I did not find any (there was a Holmes fan, but that did not work).

Since I use the extender, I believe I can't use the learned signals directly. What can I do to generate the code for these 5 buttons in KM? ... Thanks.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Sat Oct 20, 2012 11:49 am    Post subject: Re: Holmes HCH8305 Heater Reply with quote

ronmon wrote:


I have recently purchased this portable heater, which comes with a 5 button remote. I am able to "Learn" the buttons, but I get a Signal Description (list of numbers), rather than a protocol. So ... I assume I need a Protocol (which has always been magic to me). I did a search for a KM definition, but I did not find any (there was a Holmes fan, but that did not work).


In order to create an upgrade for an unrecognized signal we need to see those numbers. Please post your ir file with the learns in the dignosis area and post a link to that file in this thread. I can't help with this decode as i'm rolling down I75 today and there is a limit to what i can do on an iphone.

The Holmes fan signals used a custom protocol that looked like this

Custom Protocol
{38K,634}<1,-3|3-1>(D:8,F:8,F:8,-21m)+
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
ronmon



Joined: 25 Nov 2008
Posts: 24

                    
PostPosted: Sat Oct 20, 2012 12:19 pm    Post subject: Reply with quote

I have added the IR file to the Diagnosis area. Note, the remote this is intended for is the 15-2104, but the IR file is from 15-2117. Thanks, and when you have a chance to reply please remember I know nothing about protocols (I will need help on what to do next).

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11435
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Sat Oct 20, 2012 1:59 pm    Post subject: Reply with quote

Vicky,
Here are the burst pairs:
1 = +1275 -425
0 = +425 -1275

and here's the binary:
11011 0000001 -6800 = button 3
11011 0000010 -6800 = button 4
11011 0000100 -6800 = button 1
11011 0001000 -6800 = button 2
11011 0010000 -6800 = button 5
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
ronmon



Joined: 25 Nov 2008
Posts: 24

                    
PostPosted: Sat Oct 20, 2012 7:44 pm    Post subject: Reply with quote

If this helps, the button definitions are:
1 - Power
2 - Mode
3 - Oscillation
4 - Up
5 - Down
Thanks for helping!
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Mon Oct 22, 2012 11:27 am    Post subject: Reply with quote

Sorry this took so long.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11438

Quote:
Note, the remote this is intended for is the 15-2104, but the IR file is from 15-2117. Thanks, and when you have a chance to reply please remember I know nothing about protocols (I will need help on what to do next).


This upgrade is formatted for the Comcast 1067B remote.
Open this upgrade and change it to the 15-2117 remote.
Then make sure the buttons are assigned the way you want them.
If you are using IR, copy the device upgrade to the device tab, and the protocol upgrade to the protocol tab.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
ronmon



Joined: 25 Nov 2008
Posts: 24

                    
PostPosted: Mon Oct 22, 2012 10:05 pm    Post subject: Reply with quote

Originally it did not appear to fully work, then I upgraded to the latest KM ... and it now works!!!

Thank you ... Now I'm NOT going to return the heater ... you (all) are great, thanks again!
Back to top
View user's profile Send private message
ronmon



Joined: 25 Nov 2008
Posts: 24

                    
PostPosted: Fri Sep 08, 2017 12:22 pm    Post subject: Reply with quote

This may be a stupid question, but I have now converted over to using RMIR, can this KM protocol be used directly? Can it be converted? Or what?

Thanks.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Sep 08, 2017 3:04 pm    Post subject: Reply with quote

Yup, you can open your old IR file using RMIR, and you can open your KM files using RM.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control