Sanyo DP32649 LCD TV - need TV and RGB discretes

joball70 · Post by **joball70** » Sun Sep 09, 2012 3:58 pm

1. Device: Sanyo DP32649
2. Type of device: LCD TV
3. Year: 2009
4. JP1/UEI Remote model: Millenium 4
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? No
9. Partially working setup code? Yes
10. Learning remote question? NA
11. Have you tried the JP1 Lookup Tool? Yes

Hi,

I am looking for the advanced input codes(i.e. hdmi, component, etc.) for a Sanyo Lcd model # dp32649. I know the original remote does not have these buttons, but i tried each of the 0-255 manual pressing of the efc's.

Here is what i found so far on the inputs:

Input Efc

HDMI 1=256
HDMI 2=254
Video 1=130
Video 2=252
Video 3=001

However, i am looking for or does anyone know the efc's for inputs TV(tuner), and RGB(pc)??

Post by **vickyg2003** » Sun Sep 09, 2012 4:48 pm

What setup code?

joball70 · Post by **joball70** » Sun Sep 09, 2012 8:33 pm

Sorry...forgot to mention.

Using code 0154

Post by **The Robman** » Sun Sep 09, 2012 8:59 pm

TV/0154 = NEC1 dev 56

The following Sanyo TV upgrades also use NEC1 dev 56, so you could check them to see if any of them have the codes that you're looking for.

https://www.hifi-remote.com/forums/dload ... le_id=1150
https://www.hifi-remote.com/forums/dload ... le_id=1151
https://www.hifi-remote.com/forums/dload ... le_id=3773
https://www.hifi-remote.com/forums/dload ... le_id=4194
https://www.hifi-remote.com/forums/dload ... le_id=5541
https://www.hifi-remote.com/forums/dload ... le_id=9219
https://www.hifi-remote.com/forums/dload ... e_id=10359

joball70 · Post by **joball70** » Sun Sep 09, 2012 11:22 pm

Nope....nothing.

Thanks Rob for lookin. Appreciate it.

3FG · Post by **3FG** » Mon Sep 10, 2012 12:09 am

Doesn't have the discretes you're looking for, but have you seen this thread at RC?
http://www.remotecentral.com/cgi-bin/mb ... words=4858

Post by **The Robman** » Mon Sep 10, 2012 6:29 am

Assuming those discretes just don't exist, do you have a toggle button that you can use to navigate to the desired input from a known discrete?

For example, the macro might look something like this:

HDMI2, INPUT, INPUT

joball70 · Post by **joball70** » Tue Sep 11, 2012 8:21 pm

Thx Rob....

I did do something like this. Turns out the "Last" button turns to the previous input used.

Since the majority of inputs i use, are the hdmi and tv tuner.

Btw, i think its more fun trying to custom program my jp1 remote, than actually watching the the tv itself...lol.

Post by **vickyg2003** » Wed Sep 12, 2012 4:34 am

joball70 wrote:Btw, i think its more fun trying to custom program my jp1 remote, than actually watching the the tv itself...lol.

Doesn't everybody.