DISCRETE CODE FOR TOSHIBA ZL1

Post by **The Robman** » Fri Aug 10, 2012 2:58 pm

gamete wrote:because the input digital television is already in in the original remote, i learn the command from the original remore to logitech ONE

Is there a way to get the Pronto hex for a learned command out of the Harmony? If there is, could you post the code for Digital TV so we know what it is please.

gamete · Post by **gamete** » Fri Aug 10, 2012 11:15 pm

strange you ask me, since you understand it more than me

if i will know it , i will say you

gamete · Post by **gamete** » Fri Aug 10, 2012 11:26 pm

try one of this program

http://files.remotecentral.com/pronto/119-1/index.html

underquark · Post by **underquark** » Sat Aug 11, 2012 3:11 am

@gamete, I believe that the Robman could get code out of a stone. He can't, however get code out of YOUR Harmony. What he's asking is can you see if you can learn a command (for Digital TV) from the original remote and into your Harmony and then get the Pronto code out of your Harmony and then post it here?

gamete · Post by **gamete** » Sat Aug 11, 2012 5:41 am

if you explain me how to do

no problem

Post by **The Robman** » Sat Aug 11, 2012 8:38 am

gamete wrote:if you explain me how to do

no problem

That's the problem, we're not experts with the Harmony here.

gamete · Post by **gamete** » Sat Aug 11, 2012 11:28 am

maybe one of program in this link
http://files.remotecentral.com/pronto/119-1/index.html

i don't understand very well english
if you read that one program convert input to hex code , let me know

alanrichey · Post by **alanrichey** » Sat Aug 11, 2012 1:19 pm

You can't get the codes directly from a Harmony, the power of the system is that you can use it to mimic any 'real' remote and then learn the codes in the usual way using an IR widget or Learning Remote.

I am quite happy to act as go-between however. If you can install the device onto my 'secondary' Harmony account I can install it onto my Harmony and check the codes for you using my IR Widget.

Username: slingboxes
Password: password

Cheers

Al

Post by **vickyg2003** » Sat Aug 11, 2012 9:12 pm

Alan, the button is located on the original remote. Normally should it not already be in the Harmony database?

gamete · Post by **gamete** » Sun Aug 12, 2012 12:08 am

only the button tv is located in the original remote and in the harmony database

HDMI1
HDMI2
ecc......

not present

alanrichey · Post by **alanrichey** » Sun Aug 12, 2012 12:12 pm

The OBC for the TV button is 68. But as gamete says, the rest are not on the original remote so are not in the database.

I am quite happy to try a 'trial & error' approach which has worked in the past, whereby I produce a remote that maps all the unused codes onto the buttons and then someone tests them to see which ones select the discrete inputs.

gamete · Post by **gamete** » Fri Apr 12, 2019 6:59 am

im back after many years

i dont remember how insert the code in my logitech harmony one
i follow these istruction but after point 10 not work

i want insert in my remote the code fot hdmi4

1. Download this zip file and extract the files to any folder: Hex to Harmony Rev2.zip
2. Using Firefox - go to http://members.harmonyremote.com/EasyZapper
3. Click the "Next" button and login using your Harmony Remote account details
4. Click "More Options" then "More Options" again for the device you wish to add a command to.
5. Click "Learn Infrared Commands"
6. In the Learn New Command Box at the bottom of the page, enter a desired command name (Do not include any spaces in the name) then click New Command
7. You'll be prompted to download & run a file called "LearnIr.EZTut". Don't run this but instead save it to the same folder where you unzipped the files from step 1.
8. Keep the firefox window open.
9. Run the file called "cmd.bat" (double-click it)
10. Wait a few seconds until you can choose wether to [L]earn new commands or to input Pronto [H]ex codes.
11. Type "H" then paste the hex code. (right mouse key>paste)
12. When it sucessfully reads the code you'll be prompted with choices including pload the code, type "U".
13. The webpage should now change back to the learn page showing your new command at the bottom.
14. In the command window, type "Q" to quit.

mdavej · Post by **mdavej** » Fri Apr 12, 2019 10:20 am

This really isn’t the best forum for Harmony questions. But your posted method, even if you get it working, isn’t ideal. I did the same thing years ago. But that page probably doesn’t even work anymore. They switched to standalone MyHarmony years ago. Just email the pronto hex to datasupport@logitech.com and have them add it. Or just ask them to add that command from some other model of the same brand. We can help you get the pronto hex if you need it.

gamete · Post by **gamete** » Fri Apr 12, 2019 10:25 am

I have the code for HDMI4
But i cant upload it in the database

mdavej · Post by **mdavej** » Fri Apr 12, 2019 12:30 pm

That's why I told you to just email it to them. That's the easiest way.

But here's how to do it your way. I just tried it, and it still works.

- After step 2 (logging into you account), open this link:
http://members.harmonyremote.com/EasyZa ... frared.asp
- Click "Select Active Device" and pick your TV.
- Click "Manual", then paste your code into the bottom box under Pronto and click "Process" then "Next".
- Type a name for the command in the box, i.e., "HDMI4" and click "Add", then "Next".
- Sync.