View previous topic :: View next topic |
Author |
Message |
Kfink526
Joined: 17 Jan 2010 Posts: 1
|
Posted: Sun Jan 17, 2010 8:47 pm Post subject: Kameleon codes for my new Samsung Blu Ray BD3600 |
|
|
1. Device: Samsung BD 3600
2. Type of device: Blu Ray Player with Netflix capability
3. Year: 2010
4. JP1/UEI Remote model: Radioshack Kameleon 15-2133
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? OOps
9. Partially working setup code? The remote still works for my other devices, and i'd like to keep it that way
10. Learning remote question? I tried using the learn function, but talk about tedious! I've downloaded many of the pieces of the program to create a wav file, but i must not have done it correctly. The pieces can't find each other. So if there is just a 4 digit code i should be using, that will about fit my technical level. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Tue Feb 07, 2012 6:14 pm Post subject: Re: Kameleon codes for my new Samsung Blu Ray BD3600 |
|
|
Kfink526 wrote: | 1. Device: Samsung BD 3600
4. JP1/UEI Remote model: Radioshack Kameleon 15-2133
5. Do you have a JP1 cable? No |
Found a match already in our File section for the RMDU which you could use to upload to your remote should you choose to get a cable. Otherwise, I crated a wave form upgrade and IR file below.
_________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
misterp1998
Joined: 24 Feb 2012 Posts: 9
|
Posted: Sun Feb 26, 2012 3:54 am Post subject: |
|
|
can't see the wave file, only the rmdu? |
|
Back to top |
|
|
misterp1998
Joined: 24 Feb 2012 Posts: 9
|
Posted: Sun Feb 26, 2012 7:46 am Post subject: |
|
|
ok found the wave file, doesn't seem to work though |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Feb 26, 2012 10:05 am Post subject: |
|
|
I down loaded the zip file. When working with the "upgrade.wav" I received block errors. When I used the other image it was a complete upgrade, which is not what we normally work with.
Typically when we export a wav we only do the upgrade. Then the procedure is to upload the upgrade and assign the code in this case DVD/0199 to a button.
This remote offers many different sizes of EEProms, so I don't even know what is "stock" and what are the "upgraded" size, but that could be causing problems too.
Before doing this upgrade, I'd recommend a reset to make sure the remote is functioning.
Try this upgrade. Load the upgrade and then assign the DVD button to 0199.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10745 |
|
Back to top |
|
|
|