JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Ir Hex codes Humax PDR iCord for Pronto

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
chicone



Joined: 04 Jun 2009
Posts: 2

PostPosted: Thu Jun 04, 2009 3:25 pm    Post subject: Ir Hex codes Humax PDR iCord for Pronto Reply with quote

1. Device: Humax PDR iCord HD
2. Type of device: DSS
3. Year: 2009
4. JP1/UEI Remote model: Pronto Pro NG, TSU 7000
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section?Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes
10. Learning remote question? N/A

I would need only the Pronto hex codes for the following commands: P+, P-, Opt+ and Archiv

Thank You for trying to help me
Chicone
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18097
Location: Chicago, IL

PostPosted: Thu Jun 04, 2009 6:04 pm    Post subject: Reply with quote

You have a Pronto and the original remote, so why can't you just learn the buttons yourself using the Pronto.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
chicone



Joined: 04 Jun 2009
Posts: 2

PostPosted: Fri Jun 05, 2009 1:25 am    Post subject: Reply with quote

Thank you Rob for your answer.

Of course I did already, what you recommend, several times...And I had complete success whith all my other devices except the Humax PDR icord HD.
I even called the customer service of Humax in Germany and they told me that teaching the Pronto these ir codes is impossible because of " different frequencies". I'm not sure he was right, because most of the ir commands of the older PDR 9700 work with my iCord.
The four codes mentioned in my initial post are in fact those I still miss.

Chicone
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18097
Location: Chicago, IL

PostPosted: Fri Jun 05, 2009 7:51 am    Post subject: Reply with quote

What he probably means is that the carrier frequency is too high for the Pronto to capture it, which is possible. If you could get them to give you the spec for the signals, it's possible to create pronto hex that replicates high frequencies.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Sun Feb 05, 2012 1:52 am    Post subject: Re: Ir Hex codes Humax PDR iCord for Pronto Reply with quote

chicone wrote:
1. Device: Humax PDR iCord HD
4. JP1/UEI Remote model: Pronto Pro NG, TSU 7000
5. Do you have a JP1 cable? No

I would need only the Pronto hex codes for the following commands: P+, P-, Opt+ and Archiv

In case you ever get a JP1 remote and cable, I found a match and recorded the IR signals with the JP1 tools to create the respective files.
And although, I couldn't find P+ or P- commands, I suspect they are listed as the SkipFoward and SkipBackward on the LHD.

Code:
Archive : Protocol=NEC1 Device=0.23 OBC=111 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

Option+ : Protocol=NEC1 Device=0.23 OBC=66 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

SkipBackward : Protocol=NEC1 Device=0.23 OBC=102 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

SkipForward : Protocol=NEC1 Device=0.23 OBC=103 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central