Motorola VIP 1232E

Passenger 9 · Post by **Passenger 9** » Thu Mar 25, 2010 10:47 am

Hi,

I need help with the codes for a cable dvr motorola 1232e, i tryied every thing (vip1200 and vip200) at the slingbox setup and nothing. I checked the ir's and they are working.

Thank you.

alanrichey · Post by **alanrichey** » Fri Mar 26, 2010 1:55 am

Are you sure about the Model Number ? I could not find a 1232e on the Logitech database that I use for my Harmony Universal remote and a Google search for Motorola 1232 only returns cell phones.

Closest I could find was a Motorola 1212 and unfortunately for you I can confirm that, like most Motorola boxes, it uses the same codes as the VIP 1200.

Have up experimented with moving the blasters around ?

Passenger 9 · Post by **Passenger 9** » Sat Apr 10, 2010 9:49 am

Tried with my logitech universal and VIP 1200 doesnt work with the box, but it does have the codes for the digital box motorola 1232E. How do i get the codes for the slingbos from the logitech universal 525?

alanrichey · Post by **alanrichey** » Sat Apr 10, 2010 11:58 am

You can't. You need to go through the normal learning procedure as you would with your normal remote.

But now that the 1232E has appeared on the Logitech database i can do it for you. I've uploaded a Test Remote at http://www.hifi-remote.com/forums/dload ... le_id=8265

Give it a try and let me know how you get on.

Al

Post by **vickyg2003** » Sat Apr 10, 2010 12:46 pm

Alan, your RDMU file reference the TDC protocol. I know that DecodeIR decodes the TDC protocol, but I don't know what the protocols.ini needs to handle this protocol. Could you tell me what your Protocol.ini settings are for this?

alanrichey · Post by **alanrichey** » Sat Apr 10, 2010 12:58 pm

[TDC]
PID=01 EE
DevParms=Variant:TDC-38|TDC-56,Device:5=10,Sub Device:5=26
DeviceTranslator=Translator(0,1,7) Translator(1,5,1) Translator(2,5,8)
CmdParms=OBC:7=0
CmdTranslator=Translator(0,7)
FixedData=A8 D0
Notes=There are two variants of this protocol, TDC-38 and TDC-56. The choice is made with the Variant \
parameter on the protocol setup page.
Code.HCS08=20 17 23 46 21 86 81 10 06 07 00 9D 00 9D 00 9D 00 9D AD D4 FF FF FF FF 05 01 60 0F 45 18 2F 35 A7 A6 6A B7 6D B7 6F B7 71 B7 73 CC FF 5C
Code.S3C80=44 8B 21 8B 14 86 81 10 06 07 00 9D 00 89 00 9D 00 89 AD D4 FF FF FF FF 05 18 03 37 10 0E C6 0E 2D 5D 1C 6A 19 15 19 17 19 19 19 1B 8D 01 49

Post by **vickyg2003** » Sat Apr 10, 2010 1:23 pm

thanks

Passenger 9 · Post by **Passenger 9** » Sat Apr 10, 2010 4:56 pm

It Worked!!!Thank you very much......

alanrichey · Post by **alanrichey** » Sat Apr 10, 2010 10:59 pm

Good, I'll move it to the Slingbox Binary File section.

Cheers

Al

Post by **The Robman** » Sun Apr 11, 2010 10:32 am

And I've put a copy of the RM file in the regular Cable folder:
http://www.hifi-remote.com/forums/dload ... le_id=8270

alanrichey · Post by **alanrichey** » Sun Apr 11, 2010 10:40 am

I'd put it in the PVR folder. Can't do a thing right

Post by **The Robman** » Mon Apr 12, 2010 6:32 am

Oops, is it a PVR? I just assumed it was a cable box. I did search first but didn't find the regular file.

alanrichey · Post by **alanrichey** » Mon Apr 12, 2010 7:18 am

I think the difference these days between a PVR and a Cable/Satellite box are becoming very blurred. If the Play/Pause functions are defined I tend to treat it as a PVR. Having said that it's probably safer to have it in both.