View previous topic :: View next topic |
Author |
Message |
mvh_2000
Joined: 27 Jun 2004 Posts: 52
|
Posted: Mon Nov 30, 2009 9:25 pm Post subject: Denon Protocol Combo |
|
|
Hi,
The attached link is a file with 8 learned signals from a Denon 1707 AV receiver.
There seems to be many different devices numbers. (2,4,4-1,8,12)
Does the Denon Combo offical protocol cover all of these device numbers or do I need to load a different protocol?
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=7578
Thanks
Mike |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Wed Dec 02, 2009 5:42 pm Post subject: |
|
|
You can use Denon Combo from KM or RM for the signals you decoded except the 4.1 (learned on L1) because it uses Denon-K protocol.
Put these into your IR file. I just tested with the Widget and it seems to send the signals matching your learned data.
Upgrade Code 0 = 63 E6 (Cable/0998) DenonK-rick_test2a (RM v1.97)
CD 00 01 D5 B3 FD
End
Upgrade protocol 0 = 00 CD (S3C80) Denon-K (RM v1.97)
45 91 32 8B 12 8F 45 08 08 00 DA 00 C6 00 DA 02
7B 90 C9 06 D0 03 54 E4 05 08 B4 06 08 B4 07 08
20 11 8D 01 46
End
Then in IR make a keymove where
target device is RCVR or wherever you intend to have it,
target key=L1 or wherever you'll want it
SourceDevice=SAT (the buttonless upgrade)
DeviceType=CBL
SetupCode=0998
HexCmd= $77 $37 _________________ Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
Back to top |
|
|
mvh_2000
Joined: 27 Jun 2004 Posts: 52
|
Posted: Thu Dec 03, 2009 6:31 am Post subject: |
|
|
Thank you.
I will try this weekend
Mike |
|
Back to top |
|
|
|