JP1 Remotes

i'm looking for a new or used 15-2116.

Or the Transister that contorls the backlight..

thanks


-Alex

i was having some trouble learning from a particular remote to a URC-8910.

I learn the keys on my remote and i download the info to IR. When i go the the "Learned signals" tab, instead of seeing the protocol, device, sub-device, Obc, efc, etc...

I get a window that shows raw data, and three text ...

yup, that was a dumb move; me overriding KM's cell protection.

anyways, u learn for yer mistakes, and i've learned pleanty so far

your FIRST post at the top, you claim that the LEARNED SIGNALS decoded to Device 176, Subdevice 16, so THAT is ground truth. You must use these values in IR.

Yes, i see where the confusion is. I had said i used device "176" and sub device "16" - But i had gotton these values from another device ...

sorry, i must seem like the bigget newibe.... i just realized the master and sub device info was included in the original learned info in IR..

works like a charm now

Maybe you were already typing and missed my earlier reply. But you seem to have ignored the answer.

Your upgrade doesn't work because you didn't put the device and subdevice on KM's setup sheet.

sorry, i diddent see that part of your post,

the reason i thought i knew these values is because ...

and here is the link to the *.IR file


i'll keep trying in the meantime, thanks for any help


https://www.hifi-remote.com/forums/dload ... le_id=3363

i see, so i must have thought it was working, but really it was working off the learned code like you said,

Could the problem be the "Main Device" & "Sub Device" settings in the KM Setup Tab. I left them with 0 values. What to these values actually affect, and how would i know what values to put ...

i tried downloading that "Panasonic 176.16," to use it as a foundatation but it says file doesent exist anymore.

I only entered the EfC code in KM, and let KM enter the rest and it worked.
Looked like i was trying to enter to much info.

However, after adding the new device in IR & loading that ...

i had ranout of memory and was setting up a new device (Panasonic DMR-ES15) from the learned code in IR.

I opened a new KM then:

1) entered my remote model (urc-8910)
2) selected device "cable" and setup code "2006"
3) have tried OBC and EFC

4) protocol name "Panasonic"
5) main device 176 (info ...

thanks guys... i following that guide now.. i guess i was confused about the extender, i wassent sure if i had needed to install one first...

thanks again...

i recently got a URC 8910. I've gotton as far as building the jp1 cable and have downloded a few device upgrades and loaded them into he remote.

However, i couldent find an upgrade for my panasonic dvr recorder "DMR-ES15" As i was learning all the keys i get the "memroy full" error. I remember ...