JP1 Remotes

There is a KM-file for Bluewin here
http://www.hifi-remote.com/forums/dload ... le_id=4454

And a bin-file here
http://www.hifi-remote.com/forums/dload ... le_id=4453

Geir

Hi!

Need help with a new protcol for a Daewoo tv/dvd combo

1. Device: Daewoo DSL19M1WC
2. Type of device: TV/DVD combo
3. Year: 2007
4. JP1/UEI Remote model: URC-8910
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? n/a
8. Checked Pronto file ...

You must add the numbers button in your upgrade.

Why?

Are you just solving the problem that IR doesn't know how to display an upgrade that is too small? That problem should not affect the behavior of the upgrade in the remote.

Or do you have reason to believe that RM creates upgrades ...

You must add the numbers button in your upgrade.

Try this upgrade

Upgrade Code 0 = 07 D4 (Cable/2004) Pioneer PDP 5080HD (RM v1.78)
5A 00 90 00 21 00 AA AA 00 00 00 00 00 00 00 00
00 00 C7 37
End

I just added a dummy number on the zero.

Geir

I discovered that if you just add one of the numbers button, the power and input will show up as just one byte command in IR.

Upload your IR file and to the diagnosis area and make a link to it and some experts will take a look at it.

And make a link to the upgrade you are using.

Download this file it contains all rdf's.

Here are some more info about teletext
http://en.wikipedia.org/wiki/Teletext

The four colored buttons are used different from broadcaster to broadcaster, but the most common used is the red and green for page up and down.

That was the first thing i did.

I copied just the number and it looks like this

Functions OBC byte2:cmd 5-digit EFC 3-digit EFC b2/ov Hex"
num 0 160 1 05573 221 250 FA 00
num 1 161 1 06597 225 122 7A 00
num 2 162 1 06085 223 186 BA 00
num 3 163 1 07109 227 58 3A 00
num 4 164 1 05317 220 218 DA 00
num 5 165 1 06341 224 90 5A 00 ...

Hi Mark!

No, i didn't change anything.

I have been testing with other files and figured out that it change
only Pioneer mix protocol (7E).

After a closer look in KM, I find out that 9.06 don't calculate the
"byte2: cmd".

Since you have it correct when you open it, I think EXCEL must have ...

I have a upgrade file (pioneer DVD) made in KM 9.00, when I open
that file in KM 9.06 it changes every other HEX code in the upgrade.

I opened it in 9.00 again and it was OK, again in 9.06 it change the HEX code again.


File open in 9.00 look like this

7E 00 BE FE FE AD 2A CB 0A AB FA 01 7A 01 ...

Thanks Rob

This worked perfect.


The IR file has been removed from the Diagnose area

Thanks for the reply Robman.

I do apologize for the late response, but right after i post the request i had a severe computercrasch on my laptop, I tried to fix it myself, but I could´nt, so I had to send it in for repair.

For the moment I am using an old laptop that I have borrowed from a friend ...