JP1 Remotes

The Robman wrote:I have created an executor that replicates this signal, including the checksum.
https://www.hifi-remote.com/forums/dload ... e_id=25262

Thanks. I'll have to try this out.

I have an additional use case/wish list for IRScope, capturing a long session and I'm talking 30 minutes here. I guess it would be most convenient if it could record indefinitely until a stop button is pressed. It would also be good to collapse or ignore any nothing space between actual signal ...

I could probably assign a few different delay codes to keys and add those keys in the macro at the expense of reduced "color" commands in the macro.

Also, to hijack my own thread...

Any recommendations on getting started with a micro controller for projects like this? I would like to work on sending and even recording IR. I would probably move on to learning for other for uses like light shows and temp and process control.

A friend gave me a ...

Thanks for all you work, Kevin. My remote is loaded and the codes all work.

I was thinking of how to have my remote do a mini show with the ears. A macro came to mind. Loading a macro worked except the sequence it a bit fast. So, I was thinking about how to add a bit of delay. What would you ...

By the by, the 90 60 A6 - Off code is a temporary off. The ears come back on after about 2 minutes.

I think I understand what you did. Here is the ict and UEI codes for off.

irscope 0
carrier_frequency 38005
sample_count 14
+2085
-417
+834
-834
+2502
-834
+417
-417
+834
-834
+834
-417
+417
-834

Protocol=<unknown> (UEI Learned)
00 00 20 00 D2 06 04 12 00 D0 01 A1 01 A1 04 E3 01 A1 00 D0 00 D0 01 ...

Bingo! It worked. My ears are blue and it's not even that cold outside.

Kevin Timmerman wrote:Try this - it should send the blue command. If it works I will do all the other 3 byte codes.

Code: Select all

irscope 0
carrier_frequency 38005
sample_count 12
+2085
-417
+834
-834
+417
-417
+1668
-834
+417
-417
+1668
-2502

Thank you. That shows the error of my ways. I was pasting this whole text part Protocol=Async9:404-432:96.42..64.32 Device=0.72 OBC=24 (UEI Learned)
00 00 35 00 D3 09 01 A9 01 99 00 CD 00 CF 01 A3 00 CD 03 42 00 CA 07 55 00 C5 03 3C 01 A5 02 75 00 C9 02 74 01 8E 01 9F FF FF 06 01 02 31 81 40 0D 32 ...

uint8_t gws_crc(uint8_t *d, unsigned len)
{
crc = 0;
while(len--) {
crc ^= *d++;
unsigned n = 8; do crc = (crc & 1) ? (crc >> 1) ^ 0x8C : crc >> 1; while(--n);
}
return crc;
}

Thanks. Some else working on the ears on the DIY Christmas forum posted this exact same algorithm last night as ...

Not sure what you mean by doing anything. After hitting OK, the Learned Signal Details box should close, and you should see a single entry on the Learned Signals tab with, amongt other things, size 53 and freq about 37000. Then you can upload to the remote.

After entering the key binding and ...

RMIR is not doing anything when I hit apply or ok. I am using the latest RemoteMaster 2.02a. I suspect an issue with needing to run the installer as administrator or do a local to me install.


ETA: I missed your desire to upload these as learned signals to a remote. You can export them from ...

I missed part of your answer when I just replied. I will try the procedure yo provided. Thanks. I'll also try to see the byte pattern you point out with IRscope.

I use a JP1.3, a COX-UCR-7820B remote, my current only way to send signals. I have an old laptop with IrDA. I am still trying to figure out how to get that software stack to send serial codes. Actually, it doesn't even see the hat. I think the laptop IrDA is ignoring it as noise since the hat doesn ...

This is a bit off topic. I hope this is the correct place to ask. I am working with a toy. Disney sells Mickey ears or hat called Glow with the Show. The ears will blink in colors during shows and at other places in the park. They will even synchronize to each other.

http://disneyparks.disney.go ...