JP1 Remotes

I was able to find a floppy cable and get that to work.
Thanks for all your help.

I'm sure i have an old floppy cable around.
How do i know which wires go where?

I have an older jp1 parrallel cable i got from the robman years ago. My cat has chewed off the 6 pin plug.
Does anyone have one for sale or know where I could get one? Thanks.

Try EFC code 046 for HDMI

I thought that might be the case.
"open/close" opens/closes the loading door and "eject" causes the selected disc to eject slightly,so you can grab it for removal.

1. Device: Sony dvp cx985v
2. Type of device: DVD changer
3. Year: 2004
4. UEI Remote model: Atlas 5 device DVR
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? Checked Sony dvp-cx985v and Sony dvp-cx875p,neither had an eject code.
8. Checked Pronto ...

Ok,I figured out that I will use a seperate button (the play button in AUX mode) to activate the DSM.Now I just need to know how to set it up.
I have the Atlas 5 device DVR remote with the extender installed.
While in the AUX device mode I want to push the play button and then have the remote switch ...

Well it appears i'm out of luck.I made an upgrade for OBC 65 using the 26.98 and 26.73 device types.My player doesn't respond to the OBC 65 device 26.98 but it does respond to the OBC 65 device 26.73 which causes it to select disc 2.
The OBC 64 for device 26.98 selects Folder all(which I knew ...

Ok thanks.I'll give it a try sometime during the week.
I'm wondering what changer that code was originally for.

Ok I made a new entry with OBC 65 selected device 26 sub 98 protocol 20.Uploaded to remote and it sends the same signal as Folder all.I need the Folder DVD code.Could it be my changer is not programmed to work with that code?

I did see that file and I do use some of the codes but I didn't see the one for the 65 OBC.Are you saying I can just add that number and it should work?

Yes that is correct.
I'm using the Atlas 5 device DVR remote with the extender 1.

After thinking about this,I don't think it will work because I might press the "enter" button a few times before I actually select the movie I want.
The remote wouldn't know when I want it to switch over.

Is it possible to have the remote switch to a different device button automatically??
For example on my Atlas 5 device remote I use the AUX device to navigate the Xlobby program on my PC using the arrow and enter buttons(which shows up on my TV thru the RGB input) .
(I use Xlobby to control my sony ...

1. Device: Sony dvpcx985v
2. Type of device: 400 disc changer
3. Year: 2004
4. UEI Remote model: urc 6131,Atlas 5device, usb uirt
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working ...

Well I still haven't found the code i'm looking for, but I did find some service menu screen codes while searching websites.
The strange thing(at least to me)is one of the ways to access these screens.
One of the ways was to use an "OFA" remote with the "Star" key.First program the remote for the LG ...