JP1 Remotes

I really think it is because I bent the LED so I could point it more directly at the OFA. It worked without any effort at all after that. I didn't have to put it on a table or hold it still or anything.

I think it just allowed me to get more signal strength into the OFA from the NAD remote.

Wow, fast response. Sorry, I forgot to put the URL, I had it copied and was all set to press cntl-v, but it slipped my mind.

Well, I went back and checked 190 and it worked, so I must have screwed up first time around. Thanks for everyone's patience for what turned out to be non-issue.

Gotta go to ...

SUCCESS! Thank you everyone for your help and suggestions. I finally go so frustrated that I just took apart the NAD remote to see if there was anything obvious. When I put it back together, I left off the red plastic cover over the LED and bent the LED so that it was pointing more directly out of ...

I've been keeping the button on the original remote pressed continuously while learning. Should I just tap it instead?

I posted a new ir file in the diagnosis area with two additional learned keys (TUNE+ and Preset 1). Neither of the two new functions actually work. And I noticed that the raw signal for TUNE- is different after I re-learned it.

https://www.hifi-remote.com/forums/dload.php?action=file&file_id=2689 ...

Hi,

I placed my IR file in the diagnosis area,

https://www.hifi-remote.com/forums/dload.php?action=file&file_id=2685

The title is "OFA 9910 to control NAD 1600"

For the RCVR, the only learned command is TUNE- (and it doesn't work). All the other commands came from OFA support when they ...

Well, a couple of sets of fresh batteries later and still no luck. Only difference is that now I can reliably get 'success' on the first attempt. Though it still takes several seconds, longer than learning on my other remotes.

Any other ideas? Thanks.

jd

Thanks for the tip - will try! I must admit, the batteries are quite old.

I bought an OFA 9910 (best thing ever) and now have a JP1 cable for it and can successfully communicate with it using ir.exe.

My system is:

Panasonic plasma (TH-42PX50U)
Panasonic DVD (S47)
DirecTV box (D10)
NAD Preamp/tuner (1600)
NAD AMP (2700)
NAD CD player (5100)

The NAD stuff is old, but ...