JP1 Remotes

for a few keys it is easiest, if you have a second learning remote, to upload an upgrade. Then teach other remote. then either download from the second remote or teach first remote and download. This puts the buttons into generaly unused learn memory and can mix any number of devices.

I came upon ...

initialy that was how it set up. I finaly got it to work, but I don't like how I coulden't assign and use a function under the macro like is posible in regular macros. I ended up using the aux device to hold misc buttons/functions to use in the macros. I am also low on keymove/macro memory. I had to ...

for that price range the URC-8910($20.99) from buy.com or amazon.com it is practicaly the same as the 8810/8811, but has an LCD. the LCD dosen't do much, but it is nice to be able to see what device it is on and easy to go through the setup menu. no counting the LED blink sequence to see what codes ...

My IR file is posted here http://www.hifi-remote.com/forums/dload ... le_id=2282

thanks for taking a look at it

I wish I could say it worked, but it has the same problem as before. The transmit LED is extreamly dim and no infrared signals are sent out. I figured out that it is only the command underling the DSM from my custom upgrade is not getting transmitted. In a regular macro this is no problem, but is ...

I now have the latest RDFs, but it didn't make a diffrence and still does not work. but thanks for the tip

Thank you for your previous help

ok now I am having the same problem as far as dim led flashing, but no command sent, from this thread . The solution there won't work for me, because I have only 3 phantom buttons and and I want to make 6+ DSMs under the receiver device.

I had to edit the RDF to ...

I install both of those in the device or protocol tabs?

Where do I find thr special protocol functions tab? then I loose you after there.

onece I figure this out I can put a macro on any key within a device such as a reciver.

What I am trying to do is send 3 commands from the reciver numeric ...

Is it possible to make macros under a specific device instead of the macro being global? Especially without an extender?

I don't think it is possible, but I thought I would put it out there and see if I'm wrong

Thanks

Thank you for the insite. I looked through the manual for that info, but coulden't find it. And the direct EFC punch it will probably come in hand.

Thanks again

That worked thanks, very strange the the other buttons only need one shift hit. oh well

Thanks again

P.S. does any one know that having to hit shift twice is a result of the remote or the programing?

hello

I am having a problem with the denon 3803 remote master upgrade file here http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1976 . None of the shifted numeric functions workand, the red led does not eluminate. The shifted volume and channel buttons work fine. When the ...