JP1 Remotes

Thanks, mdavej, this was very helpful in setting up my 15-2104 to work with a VSX-43.

When I learned codes from the remote to my 2104, many decoded as pairs with different device, OBC combinations. The Pioneer spreadsheet shows almost all of them are one device two OBC combos.

I was going down the ...

Have a look at your motherboard. You might have an LPT1 header, just not being used.

I picked up an Auvio dongle on clearance at Radio Shack for about $2 a few months back. YMMV

8.04 installed on 64 bit Win8 all be itself, and an LPT cable is working.

Does something similar work for RMIR? I get a "no remote found" message.

I got Edmund's remote and have captured it. While the SAT/2371 uses NEC2 190.239 these learns all use NEC2 234.194 and here's the kicker, there's a toggle bit, so it looks like each button uses 2 OBCs.

So, bottom line, we would need a protocol upgrade to generate these signals.
The 190.239 was ...

And just like that it works....THANKS!

I don't follow exactly what is going on here so I have some studying up to do.

It reminds me of the old line that with 2 wheel drive, you can go off the road and into the woods, but not so far a tow truck can't pull you back out. With 4 wheel drive you can go ...

What a good idea and an interesting result.

I learned Vol+ and Vol- from the 5000 extender to the 2104 and I get a different result.

Vol+ in the upgrade is Denon device 2, OBC 14, EFC 054 and Hex B8 8F.
Learned back I get Denon device 2, OBC 14, EFC 145 and Hex 70
The EFC in the IR devices page ...

I hadn't seen the combo thread, so I went looking. I see you uploaded a combo Friday based on a UEI combo. I'll watch closely!

So on the 5000, yes the volume key is sending a signal (red flashing light + camera trick both confirm). I downloaded from the remote and compared it to what I had uploaded ...

I just started working with the Replay 5000 1.2 extender and have a threshold problem. I'm not having success with the remote controlling my Denon AVR-787 receiver at all.

Step 1. I have a RS 2104 working my setup just fine. I opened the upgrade file it uses in RM, changed the remote to the 1.2 ...

There is an upgrade for the new 12 button Roku remote that has been uploaded here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9048

The 12 button remote uses a different device code altogether (234.194), but all the boxes seem to respond to either the old 9 button remote code ...

The Mad Catz HDMI switcher was a gizmo (I don't think Mad Catz makes them anymore) that was styled to snap onto a PS3. I picked it up at a Gamestop on clearance for $20. It would do three things:

1. It was an IR receiver that plugged into a PS3 USB port and passed many Sony DVD codes to the PS3. I ...

News pending:

Roku has introduced three new models of the video box, two of which are shipping with a new remote with three new buttons: back, instant replay and options. It appears the new remote will work both the new and old boxes, and that the software on all the boxes is the same. So we should ...

I recently replaced the battery in my iPod with a kit from ipodjuice.com that included an extremely effective tool for cracking open the case. The basic principle is similar to the most excellent instructions Tommy Tyler posted, except that one half is metal and there are things poking through to be ...

Thanks. I used the 4-device Emerson Combo and built a simple upgrade for just the discrete inputs. I got fixed data of 00 4B 00 00 though, and the input keys don't function correctly, so I have to fiddle some more with that.

The part I'm missing is how I would land on the right protocol. By way of ...

I'm in the process of moving over the setup I have for my 15-1994 to a URC-10820. One of the device upgrades I have is for my Maxent TV, which uses a combination of Emerson and Sampo codes. I've used the upgrade here http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1141

When I open ...