JP1 Remotes

I have a Toshibs Regza 42RV530 42-inch LCD that has discrete codes for input selection as well as discrete power codes. Codes are available in file section listed as "Toshiba Regza LCD 47HL167 some discretes"

Thanks anyway... solved my own problem. Using run as administrator allows IR to launch without error messages. Problem with setting RDF path was me! In the File>Set Directory>RDF path... dialog, I didn't properly select the RDF directory by double clicking, I only highlighted it with a single click ...

I've searched and can't find an answer for this. I'm trying to set up IR 7.11 on a new clean install of Windows Vista. I'm getting errors. First, when I run ir.exe normally, I get error: Failed to set data for ". After clearing error msg IR launches. If I run IR as an administrator, it launches ...

Try searching the internet for a Leapfrog IR remote extender LF-IRX. It should be in your price range.

I use the "table" function of Microsoft Word to create a small label that matches the key pattern at the bottom of the remote. I then print the table on standard paper, cut it out, and attach below the buttons using regular old scotch magic tape. This is very flexible. Since I use device specific ...

I set mine up so a regular short key press of a device button initiates a macro to power on devices, select inputs, and leave remote in proper mode for the particular device. This is simple for wife and others. I then use a SET + device key if necessary to switch the remote to control a device ...

Try this

http://www.hifi-remote.com/forums/dload ... le_id=3623

Looks like it works just fine. I will continue to test the device upgrade by using it for a while. I edited the Directv section of my RM protocols.ini by adding the new protocol info you supplied. Then I built the device upgrade selecting the URC-10820 and the Directv protocol. Copied both the ...

John. Thanks for looking into this. I'm a patient man so you don't need to hurry on my account. You, no doubt, have plenty of other things to keep you occupied. I expect many could benefit from addition of Directv protocol support to RM. I know I would.

Yes, Capn Trips, you're exactly right.

I would like to build a device upgrade for my Directv HR20 HD DVR to be used on a URC-10820 JP1.2 remote. The Directv protocol (PID 01 62) is not currently supported for JP1.2 remotes in either KM or RM. Can I create the requred protocol update myself and, if so, how?

The "30s slip (jump to end)" code functions like the "advance" key on the original remote. That is, a short key press skips (slips) ahead 30 seconds in a recorded program. A long key press (about 2 seconds) jumps to the end of a recorded program.

See new Directv Plus HD DVR HR20 file in File Section, Device Upgrades, Satellite.