JP1 Remotes

OK, good to know. I knew I'd learn something from this post.

I have tried several OBC codes above and below the used range of 62-76 with no success.

Not knowing RS232 vs IR codes, I had assumed that there would be equivalent IR codes for all given RS232 codes. They might be there, but I have not ...

Yeah I'll do the search. I just didn't know if someone already had a nifty utility to convert Ascii or understood the relationship.

Don't try random EFCs. Instead, look at the used OBCs on the Code List page. You will see the they are all in a tightly-bunched group of OBCs 62-76. I would start any Code Search in that area.

Ok random was a poor choice of words. I did exactly what you suggest, except I was looking around the ...

1. Device: Parasound 2100 new Classic Preamp
2. Type of device: 2 Ch analog pre amp / Misc Audio
3. Year: 2007
4. JP1/UEI Remote model: URC 8910
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9 ...

Well, I actually found an .m5 file on remote central to use with my MX500 remote. I need GE control from this remote anyway, so this solves my problem.

Bump - HT remodel is done, GE 3104 and NTGRX 2SL are installed and work fine. I still need to get th 3104 working with a JP1 remote.

Anyone else have any tips to get me running?

Yes, General Tab - Aux/Home/0597 is what I am using.

Also, check the Notes in the Upgrade to see if any of them apply to your unit:

What does that mean exactly? I am using a GE 3104, not any of the GRX A1-8 AFAIK???

I just installed a Lutron Grafik Eye 3104 in the HT. I am using three of the four zones. I do not have the accessory remote, so I tried to program a RS 2116 with the standard GE codes from here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2363

I use KM 9.x, set the remote to ...

Thanks Capn. I'll give it a try.

Yes, I could make more use of buttons/device on the remote, good idea.

I have created a new device code for the newly released Emotiva LMC-1 Pre-Amp here: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3389

I am trying to find any/all discrete codes for this device, exp. on/off.

So far I have tried all OBC from 0-125, still working my way up to 255 ...

Good work Rob. I'll give these a try in the next few days. I do want to use the KM upgrade to program the Velo functions into an 8910.

thanks again,
Rich

OK, Sorry for the delayed reply, went away for Mem day weekend and just now getting back to this stuff.

Looks like Version 1 test works on my remote. Although the on/off cmds work on the VOL +/- keys not the CH +/- keys(Set keys on the Velo remote)

Version 2 test: Key moves do not work my TV at ...

Try one of these

TV (Sony) Device 0000 EFC 113 - Discrete On

TV (Sony) Device 0000 EFC 109 - Discrete Off

The Robman wrote:

rmassey wrote:I tried to do a key move (preset 6/Defeat to the . key) with no success. The velo remote seems to accept an upload, but the key has no affect.

If you tried to do the keymove using the version 2 RDF, repeat the process using the version 1 RDF.

Tried Version 1 and Key move, No go.

Do you also have a JP1 learning remote at your disposal? If so, could you learn the buttons from this remote and post the IR file.

Counting the two I bought from you last week... :) I have six.

I learned most (Partial due to memory limits) into a RS 2116 here
http://www.hifi-remote.com/forums ...