JP1 Remotes

I'm using RMIR v2.12.1.

I just tried entering 01 AD as an alternate PID (which I got from looking at the file pointed to at

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25742


which RMIR did not like at all. So I removed it, and now the warning no longer exists? Problem fixed ...

Beats me? Was the warning there when you first opened the file? It still comes up for me...

I realize this is probably a stupid question, but - I am still using Windows 7, could that have anything to do with it?

Thx,
Tom

Just to reiterate, this setup DOES work (apparently, and so far...), so I'm not sure if it really even IS a problem? Just being anal, I guess. Let me know whatcha think.

And I just have to add, what you guys have done with all of this stuff over the years is AMAZING! Many many people out here are ...

Not sure how to link to the file, I posted it in the Diagnosis area with the title PID Conflict. Here's a copy of the address bar, will that work?

http://www.hifi-remote.com/forums/dload ... e_id=26183

Thanks again,
TBone

I'm at work now so can't do much more on this until around midnight.

Hey, I don't wanna make you put a lot of effort into this for me, like I said, I can just revert back to using the learned signals, if it's too much hassle.

Thanks,
Tom

Hi Rob,

The upgrade started as a NEC 4DEV Combo (which did not have this issue), but I changed it to NEC 4DEV Yamaha Combo after adding some learned commands (Bass, Treble, Presets) that require YStyle inputs. The original protocol is 01 1A, and I added 01 FF to the "Alternate PID" window, and the ...

Hello,

Back into this after being away for about 15 years...

So what exactly is happening when you get the message, "Protocol ID conflicts with a built-in protocol. To use both this and the built-in protocol in device upgrades, this one needs to be given an Alternate PID."?

What is the procedure ...

Tbone03045 wrote:My Advent TV uses RC5 device 1.

Mistake in my original post, meant to say device 0.

Turns out there's an easy fix to this one.

There are three device codes defined in the IR initialization file (Irremote.ini), for RC5 devices 0, 30, and 31. All it took was a semicolon to comment out the device 0 definition line in that file, and the IR receiver no longer sees my RC5 device 0 codes ...

johnsfine wrote:What do you know about files in the PVR that control its IR reception and/or what can you find by searching or asking in forums where other people know about that PVR?

Nothing. The search is on.

Thanks for the fast replies.

I assume the Advent remote also works the PVR?

I just tried the original Advent factory remote and yes, it also works the Hauppauge.

The Hauppauge is a PC based concept, right?

Yes, it's a standalone TV receiver which connects to my notebook via USB. And it works ...

Hello,

I just bought a Hauppauge WinTV PVR2 (PVR which records video to my hard disk in my PC), and am working on setting it up in my 2116 because the remote that came with it is anything but intuitive. The signals from the Hauppauge remote are RC5 device 30 (which is different from the Hauppauge ...

Just to clarify, the learns in my previous post were from the original bose remote, and then I compared the signals to those described by PB. Sorry for any confusion........

TB

Have you tried learning the same button multiple times to see how the toggle changes.

Well, that's the problem with this whole theory. I have done this more than once and the signal is identical every time, no evidence of anything toggling in the command bits, and no toggle bit mentioned in the ...

Hey, thanks for the replies, guys. Lots of good info here to be digested. I will definitely be checking out the Barry Gordon document to see what I can learn from that.

Not to continue being a pain here, but I have one more question - how difficult would it be to add a command or series of commands ...