JP1 Remotes

Looking back it was a Technics Cd carousel
and from a schematic I just downloaded it looks like the ring is the V out on the plug to the jack, the sleeve to Grd and tip vcc.
Of course different brands may have a different configuration
I must say back then it sure made me happy I got it working

The IR module I used was RS 276-137B
I do not think the B in radio shack numbers matters
I just found some here
https://www.ebay.com/str/ntcsurplusoutlet?_trksid=p4429486.m3561.l170197

I used a 5 volt salvaged power supply but now a days I think a USB charger would be perfect for this
I wired power ...

I will add this info in case it can help anyone
I once bought a discounted Panasonic 5 Disc CD changer that did not have remote capability
It did however have a link jack on it that is supposed to go to a Panasonic receiver
and operate through the receiver
Since my receiver was not Panasonic I built ...

Sorry Graham
Problem solved corrupt Remote 981 reset did the trick
I think this remote was one of the 1st used during development of the RDF
and before we found what to do with $74 $75 for the Real-time Macros
some macros in the RMIR are wrong I also have all devices as "tv" so that
it could be ...

Further experiments seem to point to a problem with RMIR or perhaps the RDF of the URC-3660 trying to use this upgrade
http://www.hifi-remote.com/forums/dload ... e_id=25707

I do not believe this to be a problem with RMIR v3.2.10
but rather a problem with the RMDU upgrade itself
When I add this upgrade to the URC-3660 the device upgrade editor show that this upgrade is Nec1 Dev 134 sub 5 but after clicking ok in the device editor the upgrade is changed to NEC1 Dev 0 ...

Thanks for the update

Rob
With recent website crashes and the fact that you previously stated that
when the site permanently crashes that it will be the end of the forum
When that happens are you going to send a mass Email to members notifying us that the website is no more ?

So far have not run into any complications with RMIR v3.2.10
Hope to do more tests this weekend

Well from this page I found out the 972 command to enable/disable this feature
http://hifi-remote.com/wiki/index.php?t ... WER_Signal

No this is not a Hack it is a normal function of the remote and I assume there might be a 9xx command to enable/disable it I just have not tried that yet.
It is a segmented remote so that makes it easier for me to play with.
So far I have never bricked one by playing with the segments
It is similar ...

Not looking for industry standard and no power macro would not be it
the remote send tv power when tv button pressed and the cable box power when the cable device button pressed
Just looking for what we in JP1 would normally call this
such as "power on device button" but this remote only has it on ...

While testing RMIR I decided to do some work on my URC-1056 B03
This remote can transmit The TV and Cable, power code when its device button is pressed.
While this can be a nice feature I wanted it off while i was testing things
I have added a setting in the RDF that can turn this feature on and off ...

Graham so far after testing RMIR v3.2.9 with 3 different remotes I have not run into any problems.
However when trying File > New > Remote Image. and selecting the new replacement remotes that you recently added such as the URC-4910 and the others
I notice something odd
When i try and add a Real ...

Graham
Device tab sorting quirk
On previous versions i could click on the heading "setup code" "protocol" etc and my devices would be sorted accordingly.
On v3.1.14 this works fine but I think somewhere around v3.2.0 to the current version it starts to not work correctly.
With Some versions some of ...