JP1 Remotes

Just as a heads up in case someone else runs into this problem I bought another non backlit remote off ebay and that one works without problem. I took all 3 remotes apart and the two that work look like they may have been done by a different manufacturer. The two that worked had this info on the PCB ...

I eventually applied the Fast Macro patch but I had this patch on the working one too. This is a used remote I got off eBay so cannot say if the previous owner did anything crazy.

I found that I can enter a learned signal from the RCA remote into the Learned signal tab of the IR file for atlas and the remote will be able to send that command. The only problem is I get some double presses while navigating the menu. Is it possible for me to put the commands in as learned ...

So I tried changing the hex to 1 still did not work. So then I disabled the extender and installed the non extender version still not working. Then I moved the programming cable to backlit version and re-uploaded just to verify and it still works on the backlit version of the Atlas 1056B01 remote ...

Here is where I got this morning before I had to head to work. I have two Atlas 1056 B01 remotes

Atlas 1056B01 No Backlight extended. This is the one I sent the IR file for.
Atlas 1056B01 W/ Backlight non-extended.

I redid the non-extended one this morning and it started to work. This evening when ...

I started over with the original RMDU file you sent me for the RCA remote and changed it over to the Atlas 1056 Extender 2.13 not sure what is wrong. I've also tried this on the non extended version of Atlas too with no luck. I uploaded the IR file here

http://www.hifi-remote.com/forums/dload.php ...

Hate to bug you again but do you know if this will work with the Atlas 1056B01. I was not able to get it to work with this remote but even trying to learn the signals does not work so I thought maybe the remote cannot support the weird protocol that is being used.

I got everything to work with 2.13 extender. I did try the fast macro patch and that worked for me too. Thanks everyone for the help.

Never mind I see it now. 02 was making it do double presses so I changed it to 01 for Left Right Up and Down and everything seems to be working now. Thanks so much for all your help.

PS button is a lot faster now. I'm not sure what you're telling me to change to change the hex from 00 to 02.

Well I am now getting a response. The problems I have now include:

When navigating the menus it sometimes misses a button press for example you have to press right twice sometimes.

For a short PS press you have to hold it in for a couple seconds before it registers.

The long PS button press seems ...

Ok I posted the two different device upgrades I found along with the current remote ir file for my remote with all the learned signals.

http://www.hifi-remote.com/forums/dload ... e_id=11512

Yeah that is exactly what the codes are learning as. The codes learned seem to match up with the codes in the ps3_Bluetooth_with_var_Hold.txt file I downloaded but if I use that on a device nothing happens. I mainly have been testing with Up Down Left and Right.

I know this was a year ago but did you guys get this to work? I have tried all the files I can find for the Harmony PS3 adapter and none of the buttons seem to work. I have an Atlas 1056B01 and a RCA RCRP05B. Picked up a Harmony 300 remote and was able to get learned signals to work but I want to be ...

Other than being a noob I don't really have a particular reason. I had an RCA remote that they had the patch for so I thought they might have done one for the Atlas. I don't use any learned signals so I wouldn't have a problem using one do you have any recommendation on what extender I should use ...