JP1 Remotes

Thinking a little more, it may not have been Rob's bin that created the realistic remote. It's been a while since I dealt with it. I am sure that I have used a bin file for a related Humax machine to mine. My machine is Humax HDR Fox T2. The related machine is Humax Foxsat HDR.

What would you like ...

The bin for remote file in mode 2 produces this http://s16.postimage.org/7336wyt0l/2012 ... 0001_1.jpg

The bin for mode 1 produces this
http://s17.postimage.org/untvls3ov/2012 ... 2532_1.jpg

I see. Thanks.

One thing that I haven't mastered is how do I change for example: "Custom13" to "Skip fwd"
"Custom13" is a button name.

Which of the following questions are you really asking:
1) I want to change which function is assigned to the Custom13 button (ie, change it from "Media" to "Skip+"
2) I want ...

I was trying to change some buttons in RM but can't see how. I was trying to add this
The hex codes that you posted need to be converted to decimal before you can enter them in RM. However, almost all those buttons are already in the RM files that I created, there are just 4 new buttons there ...

I was trying to change some buttons in RM but can't see how. I was trying to add this
The hex codes that you posted need to be converted to decimal before you can enter them in RM. However, almost all those buttons are already in the RM files that I created, there are just 4 new buttons there ...

I was trying to change some buttons in RM but can't see how. I was trying to add this
POWER - 0
SOURCE - 2
ONE - 3
TWO - 4
THREE - 5
FOUR - 6
FIVE - 7
SIX - 8
SEVEN - 9
EIGHT - a
NINE - b
ZERO - c
TV/RADIO - d
MENU - e
P- - f
P+ - 10
UP - 11
LEFT - 12
OK - 13
RIGHT - 14
DOWN ...

I'm afraid that the Mode 2 file when opened in RM then exported to binary C2000_RV does not work with my Humax.

Another strange thing, I thought I uploaded my S2011_RV.bin but I see TWO files S2011_PL . I don't know what's happening.

the only difference between the codes sent in the different modes is the last part. 0x1000 for mode 1, 0x10fa for mode 2 There is more than one way to write these IR signals that are sent LSB first. The convention we use here is to reverse the bits within a single byte, but to keep the byte order ...

What is a widget?

I did note that they used 0.23 1.23 2.23. I wonder if they did 0.16 1.16 2.16 ....
Really there are too many combinations to dotrial and error.
Those didn't work either, but I may have some useful information. I was told by someone, the only difference between the codes sent in the different modes ...

One pair managed to wake my other box 0,16.
Anything else I might try?
Do you need anything else? It looks like you've found the device code/sub-device code you need, right?
I was saying in post 1 that I do have 2 boxes. The box which was awaken is the box I can control already.Don't need that ...

Oh sorry. Since you had created a bin from an rdmu I thought you already knew how to do this. Open the Humax rdmu and replace the device and subdevice values with the various pairs of numbers. This is located on the first tab, right below where it says NEC1. Then generate the bin and test.
Thank ...

We don't have the humax box to capture the code. There are too many combinations to try all of them. 256x256 to be exact. However you could try the various combinations that we have in the upgrdes, that's a reasonable number of choices and just might yield you something.

Humax is known to use Nec1 ...

I have created binaries using Remotemaster and the rmdu file you pointed me at and I also used bin files from the HD 7000 forum but none will work.
The remote in the first link I posted works ok. On the physical remote I press OK and 0 together which gives me a choice of modes 1 to 6. The remote in ...