JP1 Remotes

Hi Rob. I know you reverse engineering the timer for me. But the thing is I can't find a field to fill in that timer value. If you look at the available fields of a function of a upgrade with this protocol in question, there is no any field to fill up for the timer.

Please correct me if I am wrong.

Thanks, the timer does use the byte of data that was previously unaccounted for, so I've added a decoder to the spreadsheet to display the time. What is the time unit? I'm guessing it's hours. I think you messed up the learn for 5 hours because it shows up as "off".

http://www.hifi-remote.com ...

Thanks, the timer does use the byte of data that was previously unaccounted for, so I've added a decoder to the spreadsheet to display the time. What is the time unit? I'm guessing it's hours. I think you messed up the learn for 5 hours because it shows up as "off".

http://www.hifi-remote.com ...

I finally got the time to learn the timer functions.
It is hot these days and I couldn't learn the signals with my a/c on.
Therefore, the wait.

Here it is:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26891
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26892

I ...

http://www.hifi-remote.com/forums/viewtopic.php?t=102405&postdays=0&postorder=asc&&start=15

A quick google search leads to this thread. I found an upgrade to my a/c which works for most of my needs, except for the timer.

To set timer on my gree a/c, I press timer button once( no ir signal for this ...

So I decided to spend more time digging into the a/c remote control signals. I spend hours on creating manual protocol using pb and rmdu. Then upload to my rcrp05b. This is becuase the manual protocol only supports? s3c8 processor. The resulting signals have not been working. I was learning the ...

If all the learned signal have the same NEC1 and 0,206, you can highlight them all and convert to upgrade. Then an entry will be in device tab.

That's very intuitive, right?

In your rmir there was an entry with NEC, but not NEC1. I think that's what was stopping you from converting to a device ...

Thanks for the reply. I assume that the learned signals take precedence over the programmed device signals. So I tried a few of the buttons I learned, but it did nothing to my a/c. This includes power on, fan auto, mode auto, mode cool.


You can find the rmir with more signals learned here

If you ...

Do your learned signals work, and if so, do they do what you expected, or do they set everything to a specific level?

I don't know how to send the learned signals from my oarusb04g. I normally convert the learned signals to an upgrade and send the "programmed" signals.

Maybe I need to check the ...

Thanks for ypur explanation. It helps me understand the basics of how an a/c remote works. However, after second thought, I find programming all the a/c remote signals to a one for all remote to have little use for me. For example, setting one button to set temp to 27, a second button to 28, and one ...

I have captured all buttons on the remote with oarusb04g with extender.
I have uploaded rmir file with learned signals to the file section.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26880

I am not very familiar with how a a/c remote works. Like does it send only one signal ...

I used to be able to wake up my pcs from sleep/hibernate by sending magic packet remotely, i.e, from the internet. You need to set a broadcast address on your router and set up port forward on your router for that to work. I sent the magic packet with ios/android, or pc as Barf pointed out.

In the ...

I bought two pairs of these mudules for GBP 175.
It allows one to use physical remote and send the signal to the receiving module, and through internet the target module will send ir signal to your av devices remote to you.

Uses case is mostly used along with hdmi encoder to form a place-shifting ...

Today I confirmed something I suspected a while ago, when I previously reported a bricked 3660.

I carelessly connected the JP1 cable backwards when performing an upload. Now, the TV button just blinks constantly. The remote doesn't seem to respond to any button presses. Attempts at a fresh upload ...

May I know what the more benefits are using a piece of software on a pc to control the device, than control them with an app on smartphone?

If you are into home automation of some sort (e.g. Home Assistant ), you want this (and a 24/7 home server). If you just want just sofa-to-tv integration ...