JP1 Remotes

Thanks, ElizabethD, and 3FG. I found the RM files and have a basic program working in my remote.

I started way-back-when with KM and open it out of habit, forgetting that RM is much easier to use.

I got a shiny new Yamaha RX-V675 amp a month or so ago. Alas, IRDecode says some important keys are NEC-y1.
I have searched around here without finding much more than some very brief explanations about how to configure KM to make an upgrade for my URC-10820 (B00).
I am not sure what I put where on ...

Sorry to pester you with a trivial. I can't find an answer with searches.

I am re-doing my URC-10820 remotes after some equipment changes. Is there a NUL device code I can use to get rid of the dire warning about invalid device codes?

Thanks.

My CaptiveWorks CW4000 came back from repair still broken so I have not checked in lately. Boasting just a little -- I fixed it. Bad PS.

I have learned a little bit in the process. The CW4000 - and possibly others - is a remote for the Linux program "VDR". The CW4000 IR receiver board uses some ...

Okey-Dokey

https://www.hifi-remote.com/forums/dload ... le_id=9383

https://www.hifi-remote.com/forums/dload.php?action=file&file_id=9382

All learned buttons for Captive Works CW4000 Sat Receiver/Media Center except CH-. For reasons unknown my URC10820 dumped out of learn mode as soon as I pressed CH-. Several times.

Actual CW button name is in the notes section.

Yes. My turn to be busy. I'll try to learn them Sunday morning.
And, please, no big rush on your end. My CW4000 is being RMA'd for bad behavior. I probably won't see it again for three weeks.

I see Rob's post following the request for more learns. (Not that I understand a single thing there). Is that a solution or would you still like more learned keys.

Thanks for all of this.

Please explain "a more complete list of the 4000". A list of functions or more learned codes?

Thanks, but not working at all. No response from the CW4000 -- correct or incorrect.

paula0015, Can you find some learns or post some learns of this protocol, my sc38+ are not accessible right now, so I can't see how this signal is supposed to look.
Thank you. I have posted a file, CW4000 Learned.ir in the Diagnosis Area
https://www.hifi-remote.com/forums/dload.php?action=file ...

1. Device: Captiveworks CW4000 (Same as CW3000)
2. Type of device: Home Media/Satelite PVR
3. Year: 2010
4. JP1/UEI Remote model: 10820 (not N)
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Oh yeah
8. Checked Pronto file section (at R/C)? Yes ...

vickyg2003 wrote:I had recently done a search for picture frame and came up with no results. Using different criteria I came up with this list
You might want to see if any of these work with the viewsonic.

Thank you. I'll report back.

Capn Trips wrote:This PanDigital is the only picture frame remote I've seen here. Can't hurt to try, I suppose.

I will and I will report back.

[Later]
Nope. The Pandigital does not work with the Viewsonic. But it was still a good thought.

mdavej wrote:I realize your remote is "hurtin", but if you could manage to learn at least a code or two from it . . .

Thank you. I realized after posting that I replaced accuracy with a cute phrase. The remote is completely dead.