JP1 Remotes

Hi I did upload both RMDU and BIN files to these 3 links above and describe them as :ECHOSTAR DVR-7400 HD ( Europe )

I hope we can close this thread.
I will release update to this BIN if any bugs will be found.
I have 3 year Satellite Programming and box subscription with Polish Satelite provider ...

Hi, thanks for all your help and troubleshooting.

I finally succeded with both Pansat 3500 and my goal was to make Slingbox BIN file for ECHOSTAR DVR-7400 HD ( european model )

PROBLEM WAS : I did not enter "2046" device code and Device Button (SAT) at DEVICE tab in IR.exe

Finally, I exported ...

Jacek,

What we really need are the latest IR file with your learns, the latest RM file you made and the latest IR file you pasted the upgrade into. You can easily post them on this site using THIS link.

It sounds like you didn't assign CBL 2001 to a device key on the general tab in IR.

Where did ...

So follwing this:
It isn't obvious, but at step 6, don't do New. Instead download from the remote, save the file, add in your upgrade, save to different filename, upload to the remote. Then test the upgrade. There is some data in the flash memory just after reset that IR doesn't know about, so ...

All learned codes from device under test PANSAT 3500S remote controll
did work from URC-8820N.

After I cleaned memory of URC-8820N and uploaded LEARNED codes it did work again.

Adding a device by copying :"Upgrade Code2 = 17 FE (TV/2046) (RM v1.98beta6a)
00 5A 00 11 00 EF EF FF
End
"
DID NOT ...

Ok it is getting closer:

1. I learned few key codes from PANSAT 3500S satellite receiver remote controll on my URC-8820N
2. All learned keys work after learning.
3. I started IR.exe and downloaded all from URC-8820N
PROTOCOL : NEC1, Device 8 , CABLE
4. I started RM.exe chose remote as URC-8820N ...

Only problem is:
My slingbox is in EUROPE. It works, I can connect to it. IR blaster is in place.

I wish I could test my URC-8820N with ECHOSTAR HD DVR-7400 but is is located just at the same place where my SLINGBOX is and I am in North America.

I did all per instructions:
""""
Start RM, and ...

I am preparing RDMU file and BIN as of now... will be uploaded soon..

PS: I will only setup few learned buttons such POWER, CH+ , CH-, SELECT, and few others. If that works then I can easly learn rest of them.

Here are both files and few pictures from RM.

I DID NOT PUT DEVICE 128 in Device field ...

I did download that new RDF for 11781178 and located in RDF folder and used that for IR . IR did found right flash chip for it and UPLOAD and DOWNLOAD works great.
here are some screenshoots from 11781178.

I think problem is with remote protocol which is not properly recognized by my URC-8820N ...

I did not change just files I change DEVICE inside of RM and exported to V,C,T,S.bin start letter automatically was given by RM inside code and outside.

I did all procedure with RM to assign OBC learned codes to buttons.
As per instructions on slingcommunity.com website.



I will try with new ...

I have original remote for Echostar HD DVR-7400 SATELLITE BOX ( european model . this is link to specifications:
http://www.cyfrowypolsat.pl/telewizja-satelitarna/tv-sat_prezentacja-dekodera-dekoder-HD-DVR-Echostar-7400.cp

I used URC-8820 to learn codes from original remote
this is IR file ( URL ...