JP1 Remotes

Why does the Comcast work great but not RS. remotes
Comcast DVR-URC-1067BX3-JP3(30393039)
RS 15-1994(RSL6RO)
The following messages appear when trying to get info from the remote.
(1)Remote not found
(2)No rdf matches starting XXXX
(3) No maps found
(4) No rdf's found
(5) Used both interface methods ...

Don't both of these programs basically do the same thing except one
uses the Java platform and the other Windows.
I looks like the IR 8.03 would be easier to use for a beginner
Lou

To: 3FG ,The Rob Man
I am not a tech writer,programmer I am just a mediocre computer person.

Installing the WinUSB driver in Windows XP

Ref 9A Click Have Disk button
I thought that a program disk CD was needed to install the driver until somebody told me the word Disk has multiple meanings it ...

Problem solvd
I would li9ke to thank those people who have worked with me on trying
to resolve the problem.

All I had TO WAS TO READ THE WDP INSTRUCTIONS VERY THOROUGHLY

Lou

I.R. version 8.03
learned signal decoder Decode(IR2.41)
exchange IR version 0.08
J12 serial driver version 0.16
cannot locate file date

Delcom proxy
provider date 1/11/2010 version 1.0.1.1
location 0 ( USB IO controller)
Device instant ID USB\VID_OFC501PID_1222\6&B2DF
CF6&0&3

Open ...

JP1
Is it normal for the Delcom driver to be listed as Delcom Proxy rather than to
be shown as a comport such asxcom3 or com4.
If its not normal what procedure to I use to make it a comport rather than proxy?
Could this be possibly the reason that I keep receiving the message Open Device Failed ...

Please excuse this 75 year old brain not working like it used to.
Could you please give me the detailed instructions on how to install the USBIODS.zip Delcom driver or is that wrong driver
I have tried everything that I can possible think off. but none will work, I don't even get the message Found ...

Thank you for the advice I will check out the settings tomorrow.
I tried the following method all to no avail. JP1 only,reversed the remote connector and finally removed the batts all to no avail.
I kept getting the following message Open device failed (error message=03)
Hope this helps somewhat ...

Hi Rob
Thanks for the fast reply
I use strictly the USB cable.
At the moment I am strictly focused on the Tommy Tylers JP1 (EEPROM) Delcom version.
Could you please refresh me on the 981 Reset.
Yes I do have soldering skills.
Interface setting JP1.X (Serial or USB-Serial) also tried JP1USB
Driver ...

How to you test the JP1 Delcom interface cable ?
Whenever the interface cable is connected to the remote all power seems to be lost on the remote.
The cable does not have to be connected to the computer USB port just plug in the 6 pin connector and the remote power is lost there are no back lights ...

I have tried both Tommy Tylers cables the JP1 & JP2/3 version still no results. The com ports in the device hardware section shows that the FTDI driver uses com port 4. Two years ago I had all working and after repairing a crashed H.D. I am having problems, I will keep trying different ideas from ...

I have a Comcast DVR URC-1067BX3 remote that can be programmed very easily. But the RS-15-1994 seem to be another problem all together. I have tied all different type of settings but no matter what is done it keeps coming back to the same dialog FAILED TO OPEN DEVICE.

I have tried IR-8.02 and IR 8 ...

What would be the best way to find out if a remote in a store is JP1 compatible without having to buy it and open the batt. door and see if it has the 6 pins. The remote in question is a GE RM25001?

Also I am having the wildcard * difficulties to be able to making it work properly if I do the ...

After installing the latest version why does the "about" still show the older version v1.40 instead of the latest installed version or is the version displayed in a other location?

RemoteMaster Device Upgrade Editor, v1.40

thanks in advanc

Thanks for the info now I can stop trying etc. If they are going to leave it out somebody should remove it from the F.A.Q.