JP1 Remotes

I know the X10 stuff is cheap but not easy to find in Germany (and with the shipping costs and 19% tax it is not cheap.

the oneforall stuff is working and the light dimmer is very good because after dimming the light no noise could be heared.
other products i have tested are louder.

so it would be ...

which Upgrade do you mean? or do you mean the *.ir File?
the only Upgrade i have is this:

Upgrade protocol 0 = 00 FD (HCS08) OFA Light Control URC-8308
20 15 22 47 11 85 40 04 08 00 B3 02 1C 00 B3 02
1C 15 CC 02 18 00 B4 B6 61 AA 00 9D B7 61 55 76
35 8A 55 78 35 8C 3C AE 55 70 35 92 55 72 35 94 ...

I have a new Dreambox with a new Remote => Dreambox V6 URC-39931 RJ0
with this Remote i don't get my oneforall Light Kit working

when I take a look in IR to the same protocol Upgrade it looks different.
do I have to change anything to get this working?

the Download =>rdf+map is here :
is not working

could someone please reupload this?

now i have two devices attached and it works fine!
thank you for your help!

If I understand it right, with the Protocol i could use 15 Devices now.
to use more devices I must make a new Protocol as example with "AA 01" (Range is AA 00 to AA FF)
so I could max use 255 Devices (reminds me of IP ...

ok next question!

if i want use Plug2, Plug3,....
which HEX Numbers I must change in the Protocol?

this upgrade is working!
thank you!


I looked at the URC-8308 and it has a different formatted protocol but it looks like it has similar timing characterstics.

Upgrade protocol 0 = 00 FD (HCS08) OFA Light Control URC-8308 Plug1
20 15 22 47 11 85 40 04 08 00 B3 02 1C 00 B3 02
1C 15 CC 02 18 00 ...

the LightKit is always at the Frequency of 433.92MHz
do you think the Remote is not able to sent in this Frequency?

but i think something is wrong with the Device Upgrade because the CH+ has the same function as Vol+ and CH- is the same as Vol- and Mute

CH+/- should power on and off the Light
Vol ...

Press and hold the button on the HC Receiver until the red light begins to blink.
=> this is working

Point your remote control towards the Command Centre and press the Channel Up (+) key. The red light should stop flashing.
=> the light is still flashing after pressing the CH+ key (it stops ...

i have tested the Device and Protocol Upgrade but it has not changed anything, the Starter Kit is not working with my Dreambox V5 Remote.

Is it possible I need first a Code for the Button "1" to program the Device to be "Plug1"?
=> in the Manual step2

first i have to press the Light Button and ...

ok
as I understand I need to upgrade the device and I need a protocol upgrade.
I have seen in RM but unfortunately I can not find a protocol 00FF.
where can I find this Protocol?

@binky123

the IR Receiver of the Starter Kit has a LED for IR Signals, this LED is blinking with every button of my Remote so i know my Remote is sending something
(the speed of the blink signal is changing with the X10 Protocol)

As I understand the Kit is not able to learn signals.


@vickyg2003 ...

ok, I understand.
now I have tested it without keymoves, and assigned the Upgrade directly to the TV Button.

but still the same Problem it is not working.

I have uploaded my new *.ir File
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=7986

the Problem is i could not program my ...

oh now i see whats wrong...
ok i will fix this and test again!

I have assigned the keymoves I need => "all lights on" => Shift+Power
"turn on" to 4 , "turn off" to 7 and so on...

the other keymoves are "0034" for my Logitech Z5500 and "2000" for my Rademacher Rollotron"

the TV/0586 is used by my Philips LCD TV but I use only Power on/off
because this I use ...