JP1 Remotes

I did not find a solution till now. But I have a working solution to get the
color keys working in PC-mode.

I "keymoved" Vol+, Vol-, Mute, OFA to red green blue and yellow, because
vol keys are mapped to audio device (and therefor unused in PC-mode)and
I don't need the OFA button for my PC ...

As you know, the color buttons don't send anything in PC mode but it's
possible to "keymove" a button "1" to "red" in PC mode. I tried to change
this keymove using the IR8 software so that "red" is sending an other
keyboard scan code. I thought "efc" or "hex cmd" instead of "key" should
work ...

Thanks for the starter file.

On http://mail.at/9040/ you can find an updated version with correct
button codes. Now all the macros show up correctly. I also tried to
change macros and upload the config successfully.

This Dev5 is very strange. It seems to be related to the PC Feature
or this ...

Status: You find the IR file on http://mail.at/9040/
9040-1.ir has mapped enter to the red button and
9040-2.ir has mapped "1" to the red button in PC mode
(difference 0x14<->0x15 on position 0x0030)

The device keys are labeled: TV, PC, AUDIO, STB

The device codes are:
TV: 11312
AUDIO: 31320
STB ...

I received the jp1.2 interface today, configured a win computer and downloaded the remote eeprom. As expected he didn't find a rdf file.

The information I found till now is:
ModelID: 11131113
EEpromSize: $1800 (6k?)

Is there a howto how I should proceed now ?

Thanks...

I just ordered a JP1.2/3 interface cable. Unfortunately there where only
US sources and I am in Vienna (Austria). Therefor it will take some time,
until I can continue.

BTW: I am really happy with this remote! It's a lot faster than the logitech
I had before (who needs a display on the remote ...

I opened the remote. You can see the photos at
http://mail.at/9040/.
What's PCB ? If you need additional photos, please ask.

@3fg: The reason for the single flash is simple: If you don't press both
buttons in the very same moment the remote sees the forward or
rewind button alone and blinks once. If you press both buttons very simultaniously it doesn't even blink once.
It is possible to generate a .wav from a jp1 file ? I ...

Thanks a lot for your the fast and good info!

Part one: copying commands with
<PC> <setup> 994 1 "red" worked. Now "red" is sending "1" !

Part two: doesn't work yet
You said <PC> <setup> 994 <setup> XXX "red" could work, but there
is no <setup> button. For this remote setup is started by holding ...

This "Oneforall" URC-9040 remote works really great, both in IR and RC mode.

In RC (PC) Mode the remote behaves like a wireless usb keyboard and
I don't care what key codes it sends because I can change my
software to every key code, but there is one bug with this remote.

The buttons red, green ...