JP1 Remotes

Mathdon & Barf,

The test upgrade mathdon supplied did work. Verified on the Delta Air Cleaner with both a URC-8810 and a ReplayTV 5000 remote. Updated the RMDU file with the actual functions that correspond to the EFCs.

It is posted here: https://www.hifi-remote.com/forums/dload.php?action=file ...

To your point, perhaps I did read an older thread. All I can say for certain is the Learned Signals work; the Convert to Device - Upgrade does not.

I have many legacy remotes (hopefully can find one that is simple and supports learning) which I can copy the signal via Pronto Hex as you describe ...

Already did exactly what you suggested (see original post).
However that new "Convert to Device" upgrade did not work. (By that I mean it did provide an upgrade, but the new upgrade failed to control the Delta Air Cleaner.)

Prior to posting, read about "Convert to Device Upgrade" it was described ...

Did post the .IR file for analysis at the Link to IR file in my post.
Could open the .IR file & re-save it as RMIR if that would help you.

But at this point I no longer can create a fresh RMIR file, as the original remote is inop.

1. Device: Delta Air Cleaner #50-875
2. Type of device: Shop Air Cleaner
3. Year: 2004 (no longer available)
4. JP1/UEI Remote model: URC-8810
5. Do you have a JP1 cable? Yes Tommy JP1, JP1.2/3
6. Still have original remote? Yes but Failed
7. Checked the file section? Yes
8. Checked Pronto file ...

I had the same problem with my URC-9964B00.
Not accepting the Prepare for Wave (Setup-Other-997). After the Factory Reset (Setup-Other-981), 4 Blinks, then Prepare for Wave (Setup-Other-997) was accepted, the remote went blank.
I played the music for an Entire Image, took several minutes, then ...