JP1 Remotes

It occurred to me that I didn't reboot the replay after loading the first RID file. So after after a reboot, I reloaded the original file you posted which works perfectly, no need to change the number after all. Sorry about the mis-information.

Again thanks so much!

Scoot

Interesting stuff... I loaded that RID onto the Replay and it would not change channels.

I decided to try a lower and unique number. I loaded your file and re-saved it as S0004fi.rid. Then loaded that on to the ReplayTV and SUCCESS! :D

You've done it again Robman, thanks so much! I am still using ...

ok Robman thanks!

I uploaded it here:

https://www.hifi-remote.com/forums/dload ... le_id=8662


That is the original one that doesn't define the sub-device.

I appreciate you man!

I noticed that name too after I dl'ed that file. But I compared the values to what my learning remote gave when i learned them and they matched. And the learned remote works!

I had messed with the string a little and got the device to stick at 2 on one version of the rid i made using that exact ...

1. Device: Limesat Ultra
2. Type of device: Satellite Receiver
3. Year: 2010
4. JP1/UEI Remote model: ReplayTV
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes nothing found
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup ...

Rob you are smart! That RID file works like a charm!! I really appreciate you doing that, especially so quickly! It works scary good!

ok I pasted the code u supplied into RidGen under power and hit hex. It generated the hex code and I hit DecodeIR. It showed values of 55 EFC & 10 OBC, the same values as what I was using before. I generated a new RID file with NEC1, Device 2, SubDevice 249.

I loaded it on the ReplayTV and the only ...

1. Device: K-Box Prodigy
2. Type of device: Satellite Receiver
3. Year: 2009
4. JP1/UEI Remote model: ReplayTV
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes found this
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code ...

Get off your high horse, I am a long-time DishNet subscriber. :P

I am just learning this and haven't got it to work yet but I can use an xmltv grabber for the Replay that loads the FTA channels into the Replay guide. I've read lots of posts on it. That's the only way Canadians can use the RTV ...

Hi Robman, thanks for the reply!

749 sends two digits

1749 sends two

7471 sends two digits and seems to send a "0" (zero) or two? at the beginning??

7500 sends two

...I could have sworn I came across one that sends three digits but maybe not, I can't find it now.

Scoot

1. Device: Captive Works CW-600S Premium
2. Type of device: Satellite Receiver
3. Year: 2005
4. JP1/UEI Remote model: ReplayTV 5040
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes, there is a def for CW600S Standard but it doesn't work on the ...