JP1 Remotes

Hello,

A small update..I have build a receiver and tried winlirc to record info from my 7025 remote. Unfortunately all my remotes at home are recognized perfectly, except my dreambox remote. :cry:
As a workaround I currently have my slingbox send out a xbox-remote signal and my winlirc/girder ...

Thanks!! I'll try to get some parts tomorrow and report back again asap.
Have to build a simple serial ir receiver first..hope it works in one go.

Thanks for all the suggestions... I had some time today to look at my cable once more. I removed the 3 components to make the cable a 1.2 version. I cannot explain it but finally the cable is working perfectly.
You can view my downloaded file from my 7025 remote here:
http://www.modfun.nl ...

Hi Rob, just to double check :D .. I use your file for the 7000
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4524 and modify this file with RM. I fill in/replace these data:
setup code:0031
device: 26
dev1: 59
dev2: 7
dev3: 68
Fixed Data = 3B 07 44 1A

I did this with all the ...

Hi Rob..thanks for the update. If I do a set990 code check with my remote I get 0031 for SAT. If I look at your list I don't see this SAT code. Does this mean it is useless for me to try the fixed data?, or should I just fill in 0031 for the setup code and try the fixed data codes? plz remember I'm ...

thx again for the reply. Yes my remote blinks 2x when I connect the cable. But I then cannot use the remote. (no blink when pressing a button) Also the tester program jp1xtest can't detect the cable. I'm going to try another pc very soon maybe that is the causing the problem.

Also I did the setup ...

I made a couple of simple pics.
I'm not skilled in soldering or making prints so my excuse for the bad work. However I do believe my print is correct so it's weird I cannot even get the tester prog to recognise my jp1.x cable. Maybe someone can see what I did wrong?

www.modfun.nl/dream7025/jp1.JPG ...

Can I build a Jp1.X cable to read out my Jp1.3 dreambox remote or do I need another kind of Jpxx cable? I have build a Jp1.X cable and cannot get it to work(not detected in tester prog etc.), but this could mean many things. I'll post picture of board asap.

Thanks again.. I looked into changing the ir set of the 7025 but this isn't possible. I think with the 7000 it was, but 7025 uses enigma2 so no remote.xml file to play around with.

At this point I want to ask for a final solution with 100% certain outcome on how I can get this to work.

Thx

@binky123..thanks again.. If I try set990 In dream mode I get 1111?? and in TV mode I get 1535. So I think in dream mode I cannot get a code unless it is 1111?. If I than fill in 1535 in all files it still doesn't work. Any tips?

@binky123..thanks for your help/info very much appreciated :wink: Filled in the correct values but still no go. I also opened up my remote. Its very confusing, the pcb displays both URC-39930BJ0-XX and URC-39930RJ0-XX The pcb is very bare with ony 1 chip under a black blob of epoxy. If I read out ...

Hi Robman..I tried above file and all files in the forum and file section regarding dreambox 7000/7020. Unfortunately none of them seem to work. I'll open my remote tomorrow and order the needed cable and hw from you.
Can you point me in a good direction for the following steps

read out ->needed ...

I see..If I want to create a binary upgrade file for people who use a 7025 remote and slingbox what is the best next step I can make? I understand that with hardware and software I can "read out" my 7025 remote can you plz point me in the right direction for this as I'm more then willing to help out ...

keenez30
Hi,

I saw your message on the forum regarding hex files for the 7020 remote.

I myself have a dreambox 7025 but I think the 2 models uses the same remote. I'm trying to get this remote to work with my slingbox. Files for the 7000 by robman don't work. I was wondering if you have any hex ...

I recently bought a slingbox a/v from the usa and wanted to use it for my dreambox 7025 here in Holland. Streaming works perfect but I can't get the remote to work with the slingbox software. I tried robman's newest files for the dreambox 7000 but these don't seem to work for the 7025. I'm not sure ...