JP1 Remotes

Does anyone know anything about these Anderic RRU401.6 remotes?

They appear to be an Inteset clone or some other Inteset derivative

Here is the manual they don't have any setup button and use four digit advanced programming commands so I am doubtful if these are of any use to the JP1 community ...

Your Welcome!
Glad to help out the JP1 community whenever I can!

I looked everywhere for said OBCs or even a Pronto hex code but I came up empty handed.

Why the unit has no buttons on it is beyond me however I do know it has a touch sensor on top but that is about useless as it is only for power ...

OK so I had more free time so I went back and I found the discrete AM and FM band buttons.

However I did not find anymore secret functions just the 2 band button discrete codes

Discrete Band buttons are as follows
AM Band is OBC 016
FM is Band OBC 096

Yes I found them using your test upgrade file and I am super grateful for that!

"Alarm Wake To" (OBC 112) was replaced by "Alarm 2" (OBC 98) as the button did nothing on my model of Bose



I don't suppose you found any other secrets in your search?
Most of the buttons did nothing however I ...

I got it to work Thank You!

Apparently I needed 2 different buttons one to activate the alarms and another to set them.
The alarm setup button now works as intended on the Wave Radio III, before (with the old upgrade) I was only able to set alarm 1

Anyway I uploaded a new Upgrade that has the ...

Anyone?

1. Device: Bose Wave Music System III Bose Wave Radio III
2. Type of device: Compact All in one music system with radio and CD player & Aux input
3. Year: 2011?
4. JP1/UEI Remote model: URC3680
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8 ...

My friend gave me a Toshiba 43LF621U19 and I loaded this upgrade into my URC3680 and the input discrete buttons work fine not really into streaming services so I didn't try those functions.

So anyway I guess this Toshiba 43" uses slightly different firmware than the Insignia versions do.

Anyway I ...

So what (if anything) can I try next?

Well did I?

I was trying to add codes to my remote and I accidentally plugged my JP1 cable in backwards!

Now I get no signs of life no lights when buttons are pressed as well as no IR signals blasted either and RMIR does not see the remote at all I tried the "JP2Dumper" tool and when I try to use ...

The Robman wrote:Thanks man, I have updated the Function names in the upgrade that I posted.

Thank You for making a working upgrade file.

So the UP and DOWN buttons are true up and down buttons and don't just set the fan to a specific setting? Glad it works.

Could you tell me which of the factory functions you assigned to each of the buttons? I can guess 3 of them.

On/Off = POWER
Increase Speed = UP
Decrease Speed = DOWN
Timer
Mode ...

The Robman wrote:I have written a protocol executor to replicate these signals, and it's included in the following upgrade file:

http://www.hifi-remote.com/forums/dload ... e_id=26804

Thank You!
I just tested it and all functions work 100%

Thanks again

I need help creating an upgrade file for my Amazon Basics 12-speed DC motor fan model B07BNK6T5Q

I get confusing learns with DecodeIR all with the same OBC and all with the DirectTV protocol but different devices as well as subdevices therefore I can't make an upgrade file.

With IRTransmorgifier ...

I bought a new interface and it has several RX, TX, as well as VCC (which I know is not needed for the this application) voltage options it came configured for 3.3V but it also has 5V 2.5V 1.8V TTL level options, so which is the right one?

PS: I bought this version as I also dabble in router ...