JP1 Remotes

I had a similar problem with my new URC8910, and JP1 parallel cable, I solved in the IR program:
1) Advanced
2) Transmission Delay
3) changed from 0 to 250

Malima

Rob,

I had success to do the protocol upgrade, I put the KM file (Cable_Receiver_DV9800_NET_Brazil.txt) in the cable upgrade section.

Thank you for your help.

Malima

Rob,

Isn't necessary to send the PB file, I learned how to assembler/disassembler in the PB worksheet. I did a god progress.

Thanks,
Malima

Rob,

Do you have the PB file, with the up grade bellow?

Upgrade protocol 0 = 01 5A (S3C8+) NEC1 40k (PB v4.00)
40 84 21 8B 12 CF 4D 08 08 01 18 01 06 01 18 03
39 D2 DC 11 94 08 B6 20 11 E4 05 06 60 06 8D 01
46
End

You send me it in a KM file, in the link: http://www.hifi-remote.com/forums ...

Rob,

I did the up grade protocol, it look very similar the original, but it lost the sub-device address, in the KM I tried to put the sub-device address in Device1, changed to Device2, changed to Raw Fixed Data, but don't work, bellow I put the learned signal, for the key1, without the sub-device ...

Rob,

I did your suggestion in PB, and copy (button Copy)/ paste in your original KM (cell H4), I see the upgrade lost the sub-device address. I did something wrong? See bellow the "key1" value I learned.

+9002 -4498 +550 -1700 +550 -574 +550 -1700 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 ...

Rob,

Thank you for your patience, I saw you put in the "Device 2", I did the up-grade you send me, and compare with the learned, I can see the values is very similar, I don't know why is not working, see bellow the values.

Key1
Learned from the original remote control:
+8600 -4300 +550 -1600 +550 ...

Rob,

Where I put the sub device address (123), in the KM, ? I tried the "Device 2", and I can see didn't work right. I have two RS15-2103, I'm comparing the original signal learned, and the up-grade (learned).

Thank very much.
Malima

Please, I have a cable receiver with a similar NEC1 protocol, but the frequency is 40KHz, I follow the PB manual, but I have a lot of doubts.
1) The signal structure is: dev-sub-cmd-!cmd, the S3C8+ don't have this kind of structure.
2) I put in the diagnose area, the files I did with, the learned ...

Mark,

Thanks, was not enable, now is working, great!

I'm looking the manual "Protocol-Builder.doc", and in that talk about some files: codes1.txt, codes2.txt, and codes3.txt; do you know were I can found these?

Marcos Lima

Please, ITried to use the PB, but is not working in my computer, bellow I put a print screen for the initial screen, in the copy area there are some #NAME?

http://img180.imageshack.us/img180/7263/protocolbuilderaz4.jpg

I live in Brazil, but I put in the Windows Regional Settings English (EUA), I ...

Rob,

Thank you very much for your help, if I discovery anything about, I will inform you.

Malima

Rob,

When I start-up the KM, I have a message error, but it works, I did some upgrade for other equipments, and the result was great, only for this cable receiver, I'm having problems. I tried to do the upgrades with the RemoteMaster too.

I put the IR file in the 15-2103, you send me, and didn't ...

Rob,

I load from the
http://www.hifi-remote.com/forums/dload ... le_id=4140

I saw it is v2.

Thanks,
Malima

Rob,

Sorry, it is not work.

My Keymap is v9.06, and when I call it, there is a toolpack error, " ...toolpack requesting support for country code: 055 (Brazilian)."

I tried to do the upgrade with the RemoteMaster v1.73, too.

Thanks,

Malima